Hi everyone. I have a nvr5232-el with 15 cams (4k and 4mp) and 2 hdd (3tb and 8tb 5400rpm)
The playbacks seem very jerky and laggy, very often a few seconds are lost between an IVS event and normal recording.
the same problem exists even if I play directly from the NVR (no smartpss or webgui)
I...
Hi everyone, I have a 5232-el NVR with 15 cams connected (they all run AI by camera).
Everything works, but when I playback from smartpss initially no problem, but after 5/10 minutes suddenly the system is unreachable both from smartpss and from the web page. In reality the NVR still remains...
I have a standalone Dahua camera that I configured to record to SFTP on events.
I use the (official) DMSS app directly (no P2P, etc) and it works extremely well for live view. At 1080p, I get fluid 500KB/s.
If I go to playback, I can see the recordings on the timeline, but the timeline is very...
I have an DS-2CD2386G2-ISU/SL indirectly connected to a DS-7616NI-I2 NVR via LAN. The camera is set to continuously record 24x7 on the NVR.
What I would like to have happen is, from 9pm to 6am, when an intruder is detected, the strobe light comes on, and the detection is highlighted when I...
Hello, I have a 2TB 4K Lorex NVR. I have 6 4K cameras. Currently, I get 26 full days of playback.
I wanted to know if there was any additional settings I could modify to get at least a full month's worth of playback. Ideally I would want 5 weeks of playback or a full month. I originally only...
Greetings again, everyone.
Since I had such great success here with my last question I would like to ask one more if I may. We are having an issue with another Alibi Witness (rebranded Hik). It's the only location where we have ever had this problem. Upon playback, the playback continually...
This is an odd one, yesterday I added a tenth camera to Blue Iris. Now when trying to playback using the 'replay' button next to the timeline or double clicking the actual timeline, Blue Iris simply crashes in Windows 10. I can double click and play 'alerts', can also playback 'all clips'...
Hello. I have problem with my Reolink-520. Some of my videos (mini clips) were recorded wont run properly. They just loading successfully with max kpbs and start dropping to zero and the clip freeze.Theres a two ways to watch them: Switching to Fluent mode (Super low quality) / Download and...
Hi All
I have a nest doorbell and also a couple of dahua ip cameras. I find the nest is such a pleasure to use , being able to scroll through the recording instantly, compared to the ip camera that I seem to give up as it is so slow reading off the sd card.
Is there anything equivalent to Nest...
Hello All,
Below is my CCTV Spec.
Hikvision 4 MP IP BULLET CAMERA (model no: ds-2cd1240-i)
Hikvision 8 CH NVR RECORDER (model no: ds-7p08ni-k1)
Here is my problem. CCTV live feed is showing in my TV via HDMI without any stuck or freeze. It just plays fine. But when i use playback option to...
Hello all,
I have just had installed a Hikvision NVR model DS7608NI-12/8P with four turret and four dome cameras. It is all working but I am struggling a bit with the settings and the User Manual is so technical, I don’t understand a lot of the jargon so I hope this group will be able to help...
I've been working on getting the Hik-Connect mobile app working and everything seems to be working ok, but I can only view video playback when I'm on my home network (that my Hikvision NVR is on). If I leave the house and use someone else's wifi or 4G, I get a "Video playback failed. Error...
Hello all, I have a problem with iVMS-4200 WEB playback if you can please help me to solve this problem
i can playback to iVMS-4200 client but can't in web client, web client have liveview and all configure funtction works but this playback not how to configure?
I can see my camera in Live View in Safari on my mac (with plugin)...BUT playback is not working.
I can locate the recorded files on my macs hard drive, but it appears the browser player is not pointed at them.
When I search for video files in Player it returns zero. At this point I'm NOT...
I'm using hik-connect on my Android phone to connect to 4 cameras on my building. It has working perfectly until a week ago when the playback started to give that error. Live view is working normal. I restarted both DVR and fiber router with no luck. Being connected directly to the router the...
I have noticed that when playing back footage in ui3 from my 4k camera, i get 1-2fps max. This is true regardless of what i downscale too. Playback from my 1080p cams is 10-15fps which is what id like to see on all my cams at home.
i ask because I am in the process of implementing a new system...
Hi,
I recently purchased 4 Dahua IPC-HDW5231R-Z, and a Dahua NVR (NVR5216-4KS 2) to go with it.
The cameras work, the NVR is working, everything is connected and I can see and record video ok. My only issue at the moment is with the playback.
When I login via ANY means of web...
So the strangest thing has happened. I recently switched phones from my LG G4 to a OnePlus 6 however I cannot view my cameras over 4G, anymore.
The strange part of this is the fact that I can actually view the playback of my cameras over 4G but not the live viewing of my cameras. What is going...
Hello. My 3 cameras record fine and also are linked to my phone with the Hik-Connect app so I can live view them fine, but playback on the app does not work. It used to when I had just one camera, but even that was temperamental, now I added 2 more cameras none of them want to play back at...
Hi,
Recently my recording of one my two hikvision cameras stopped and so i went to my nvr to start to re-record. This is fixed now but looking via my hik-connect app playback i see a solid blue continuous bar rather than what i had before which was a smart motion type playback where i could...
Hi all,
I updated from 4.6.4.8 to 4.6.4.9 in the week, but yesterday I noticed that some of my cameras (which are on WiFi, and not on the premises) when watching the clips had started to freeze for 3 seconds then play for 3 seconds.
Watching the live feed is fine, but replays keep freezing.
I...
Hi,
My store has 15 cameras (hike vision) connected to a hike vision NVR through ethernet cable
When I try to playback cameras, If I select more than 3 cameras, my CPU usage will become 100%
(NVR Model: DS-7716NI-E4)
NVR Information: Hangzhou Hikvision Digital Technology Co. Ltd.
firmware...
Hi All,
After a couple D-Link Cams I recently bought a Dahua SD22204T-GN-W and am playing/experimenting with it. I configured an IVS rule and managed to successfully store the triggered recording onto my FTP server. The thing is that the recordings are not shown in the playback tab.
Time and...
On playback on the DS-7608NI-I2 when the photo thumbnails appear under the main playback image, instead of the thumbnail photos I'm getting no resource on all of them.
This is playback on a single channel only.
NVR has 2 WD Purple 4Tb drives and the system has only 2 x 4MP Hiks connected so...
I have three DS-2CD2132F-I all on firmware 5.3.0 build 150814. These all record (events only, not continuous) to separate SMB shares on a NAS with quotas set. The shares are 800GB and 2 x 515GB, recording is set to overwrite.
All is well until for some reason the recordings on one or more...
For some reason now whenever I pause the alerts video playback on the iphone app, the screen goes black until I press play again. Previously it would pause and actually increase image quality of the still significantly.
Also clicking the alerts button from the main screen hardly ever displays...
I bought Mini NVR 2 box from Aliexpress and setup it with external 4TB HDD.
http://s.click.aliexpress.com/e/brORWfpq
The device is showing that videos are recording. But when I try to playback old videos, sometimes player screen becomes blank and some times it load the video, but it doesn't...
Finally got my v4 platform up - amazing how the CPU usage goes down when you have a decent CPU and present-day o/s. ;)
For some reason I thought playing back Alerts would display all my cameras - do I need to make a camera group or something for that, or is it not yet a feature? I wouldn't...
New Hikvision NVR - Poor performance - SOLVED
Hi all! First post outside of my introduction. Been reading for about a month now.
I already have a Y-Cam camera but wanted to step it up..
I just received a Hikvision 7608 NI SE 8P with a 1 TB drive installed.
I bought it from B&H Photo since that...