Hello, I successfully updated N48PBB with hikvision V4.30.080 build210412 of [7100NI-Q1] firmware
First I updated latest firmware from annke firmware downloads and then V4.30.080 build210412 NVR_K75_BL_ML_E_STD_V4.30.080_210412.zip
First I updated latest firmware from annke firmware downloads and then V4.30.080 build210412 NVR_K75_BL_ML_E_STD_V4.30.080_210412.zip
Saw this and updated my c800 turret with mic to enable Human and Vehicle Detection.
Attachments
I can confirm that this method worked to upgrade a Vikylin DT347G2 to the latest Hikvision firmware.
I was also able to get an Annke C800 to work as well.
I was also able to get an Annke C800 to work as well.
Last edited:
Hello,
I tried to update N48PAW to HV FW
K2% 20K4% 20K8 /% 5B76% 2077% 2086% 20NI-K2% 20K4% 20K8% 5D / V4.32.116% 20Build220112
but it still ends unsuccessfully.
I tried to update N48PAW to HV FW
K2% 20K4% 20K8 /% 5B76% 2077% 2086% 20NI-K2% 20K4% 20K8% 5D / V4.32.116% 20Build220112
but it still ends unsuccessfully.
Attachments
Tried the HikVision firmware on a
C800 I91BM
Both
IPC_G5_EN_NEU_5.7.3_211222
And
IPC_G5_EN_STD_5.7.3_211222
Both, im unable to change the Frame Rate. Just says device error.
Ive tried going back to the Annke firmware from here
Annke Vision - How to Enable the Human & Vehicle Detection? (C800 cameras) – ANNKE | Help Center
Still getting a device error and unable to change any settings
C800 I91BM
Both
IPC_G5_EN_NEU_5.7.3_211222
And
IPC_G5_EN_STD_5.7.3_211222
Both, im unable to change the Frame Rate. Just says device error.
Ive tried going back to the Annke firmware from here
Annke Vision - How to Enable the Human & Vehicle Detection? (C800 cameras) – ANNKE | Help Center
Still getting a device error and unable to change any settings
Hi have you found a Solution? I am facing the same issue i need the cam to do h264
BR
It seems there are multiple different version of the N48PAW NVR...
I've recently ordered one from amazon.fr and unfortunately none of the firmware mentioned in this thread worked for me. Running dmesg on the device, I've come across 2 interesting lines:
and
I've found nothing about "MOLBVT" but there are a few Hikvision NVR/DVR based on K9B2 as noted there : Sadly, all K9B2 device firmware fail to install on my N48PAW with the same error as @Josa.
Any idea how I could further proceed ? Here is the full dmesg log and a picture of the board itself:
I've recently ordered one from amazon.fr and unfortunately none of the firmware mentioned in this thread worked for me. Running dmesg on the device, I've come across 2 interesting lines:
-0-[ 0.000000] Find the board(K9B2 BASE BOAD).and
-1-[ 1.084350] [HKBSP]Find the platform(MOLBVT).I've found nothing about "MOLBVT" but there are a few Hikvision NVR/DVR based on K9B2 as noted there : Sadly, all K9B2 device firmware fail to install on my N48PAW with the same error as @Josa.
Any idea how I could further proceed ? Here is the full dmesg log and a picture of the board itself:
Code:
# dmesg
-0-[ 0.000000] Booting Linux on physical CPU 0xf00
-0-[ 0.000000] Linux version 4.9.138 (root@CI-Backend-Slave-13-79) (gcc version 4.9.4 (molchipv500-armgcc-uclibc-190826) ) #2 SMP Thu Feb 4 12:09:19 CST 2021
-0-[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
-0-[ 0.000000] CPU: div instructions available: patching division code
-0-[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
-0-[ 0.000000] OF: fdt:Machine model: FY01
-0-[ 0.000000] [HKBD]: Start parsing args: 'totalmem:1024M,kmem:640M,emem:384M'
-0-[ 0.000000] hkvs.mem totalmem[0x40000000].
-0-[ 0.000000] hkvs.mem kmem[0x28000000].
-0-[ 0.000000] hkvs.mem emem[0x18000000].
-0-[ 0.000000] [HKBD]: Start parsing args: 'pcb:0x80421,board:0xb700,processor:0x23'
-0-[ 0.000000] hkvs.board pcb[0x80421].
-0-[ 0.000000] hkvs.board board[0xb700].
-0-[ 0.000000] hkvs.board processor[0x23].
-0-[ 0.000000] [HKBD]: Start parsing args: 'devclass:0x5f5,devtype:0xb632'
-0-[ 0.000000] hkvs.device devclass[0x5f5].
-0-[ 0.000000] hkvs.device devtype[0xb632].
-0-[ 0.000000] HIKBASE version ##54258[kernel:56716]
-0-[ 0.000000] Find the board(K9B2 BASE BOAD).
-0-[ 0.000000] Ignoring unrecognised tag 0x54410001
-0-[ 0.000000] Ignoring unrecognised tag 0x54410009
-0-[ 0.000000] cpldinfo offset[0x280000], size[0x100].
-0-[ 0.000000] Ignoring unrecognised tag 0x484b0002
-0-[ 0.000000] Ignoring unrecognised tag 0x484b0005
-0-[ 0.000000] CMEM[00]: ID[69] 0x88000000+0x00020000 reserve ok!
-0-[ 0.000000] CMEM[01]: ID[70] 0x8f000000+0x00001000 reserve ok!
-0-[ 0.000000] Memory policy: Data cache writealloc
-0-[ 0.000000] On node 0 totalpages: 163840
-0-[ 0.000000] free_area_init_node: node 0, pgdat c0c38b00, node_mem_map e7a5a000
-0-[ 0.000000] Normal zone: 1440 pages used for memmap
-0-[ 0.000000] Normal zone: 0 pages reserved
-0-[ 0.000000] Normal zone: 163840 pages, LIFO batch:31
-0-[ 0.000000] percpu: Embedded 13 pages/cpu @e7a33000 s24460 r8192 d20596 u53248
-0-[ 0.000000] pcpu-alloc: s24460 r8192 d20596 u53248 alloc=13*4096
-0-[ 0.000000] pcpu-alloc: [0] 0 [0] 1
-0-[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162400
-0-[ 0.000000] Kernel command line: mem=640M console=ttyS0,115200n8 hkvs.partition=0x600@0x8f000000 hkvs.mem=totalmem:1024M,kmem:640M,emem:384M hkvs.board=pcb:0x80421,board:0xb700,processor:0x23 hkvs.device=devclass:0x5f5,devtype:0xb632 hkvs.end=end noinitrd ip=192.0.0.64:192.0.0.128:192.0.0.1:255.255.255.0:Hik-eth:eth0:none
-0-[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
-0-[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
-0-[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-0-[ 0.000000] Memory: 632504K/655360K available (5025K kernel code, 229K rwdata, 1372K rodata, 4096K init, 4476K bss, 22856K reserved, 0K cma-reserved, 0K highmem)
-0-[ 0.000000] Virtual kernel memory layout:
-0-[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
-0-[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
-0-[ 0.000000] vmalloc : 0xe8800000 - 0xff800000 ( 368 MB)
-0-[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
-0-[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
-0-[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
-0-[ 0.000000] .text : 0xc0008000 - 0xc05e8794 (6018 kB)
-0-[ 0.000000] .init : 0xc0800000 - 0xc0c00000 (4096 kB)
-0-[ 0.000000] .data : 0xc0c00000 - 0xc0c39640 ( 230 kB)
-0-[ 0.000000] .bss : 0xc0c39640 - 0xc10987e4 (4477 kB)
-0-[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
-0-[ 0.000000] Hierarchical RCU implementation.
-0-[ 0.000000] Build-time adjustment of leaf fanout to 32.
-0-[ 0.000000] NR_IRQS:16 nr_irqs:128 128
-0-[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1308.00MHz (phys).
-0-[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x12daa358a0a, max_idle_ns: 440795270307 ns
-0-[ 0.000005] sched_clock: 56 bits at 1308MHz, resolution 0ns, wraps every 4398046511103ns
-0-[ 0.000011] Switching to timer-based delay loop, resolution 0ns
-0-[ 0.000333] Console: colour dummy device 80x30
-0-[ 0.000345] Calibrating delay loop (skipped), value calculated using timer frequency.. 2616.00 BogoMIPS (lpj=13080000)
-0-[ 0.000353] pid_max: default: 32768 minimum: 301
-0-[ 0.000437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
-0-[ 0.000442] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-0-[ 0.000968] CPU: Testing write buffer coherency: ok
-0-[ 0.001193] /cpus/cpu@0 missing clock-frequency property
-0-[ 0.001201] /cpus/cpu@1 missing clock-frequency property
-0-[ 0.001210] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
-0-[ 0.001453] Setting up static identity map for 0x80100000 - 0x80100058
-1-[ 0.002670] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
-0-[ 0.002748] Brought up 2 CPUs
-0-[ 0.002756] SMP: Total of 2 processors activated (5232.00 BogoMIPS).
-0-[ 0.002759] CPU: All CPU(s) started in SVC mode.
-0-[ 0.003302] devtmpfs: initialized
-0-[ 0.006101] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
-0-[ 0.006126] Current board is PCB[0x80421], BOARD[0xb700]
-0-[ 0.006349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
-0-[ 0.006365] futex hash table entries: 512 (order: 3, 32768 bytes)
-0-[ 0.006462] pinctrl core: initialized pinctrl subsystem
-0-[ 0.007020] NET: Registered protocol family 16
-0-[ 0.007294] DMA: preallocated 256 KiB pool for atomic coherent allocations
-0-[ 0.037602] GPIO chip 1b000000.gpio@0x1b000000 , irq(150) base(496) ngpio(16)
-0-[ 0.038501] GPIO chip 1b100000.gpio@0x1b100000 , irq(167) base(480) ngpio(16)
-0-[ 0.039398] GPIO chip 1b200000.gpio@0x1b200000 , irq(184) base(464) ngpio(16)
-0-[ 0.040260] GPIO chip 1b300000.gpio@0x1b300000 , irq(201) base(448) ngpio(16)
-0-[ 0.041082] GPIO chip 1b400000.gpio@0x1b400000 , irq(218) base(432) ngpio(16)
-0-[ 0.072909] dma64 10200000.dma64: Molchip DMA Controller,32 channels
-0-[ 0.073186] SCSI subsystem initialized
-0-[ 0.073355] libata version 3.00 loaded.
-0-[ 0.073550] usbcore: registered new interface driver usbfs
-0-[ 0.073591] usbcore: registered new interface driver hub
-0-[ 0.073631] usbcore: registered new device driver usb
-0-[ 0.074379] mc,efuse 1ba00000.efuse: NVMEM EFUSE
-0-[ 0.075170] clocksource: Switched to clocksource arch_sys_counter
-0-[ 0.081298] NET: Registered protocol family 2
-0-[ 0.081738] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
-0-[ 0.081800] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
-0-[ 0.081888] TCP: Hash tables configured (established 8192 bind 8192)
-0-[ 0.081936] UDP hash table entries: 512 (order: 2, 16384 bytes)
-0-[ 0.081969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-0-[ 0.082101] NET: Registered protocol family 1
-0-[ 0.082392] RPC: Registered named UNIX socket transport module.
-0-[ 0.082396] RPC: Registered udp transport module.
-0-[ 0.082398] RPC: Registered tcp transport module.
-0-[ 0.082401] RPC: Registered tcp NFSv4.1 backchannel transport module.
-0-[ 0.097039] persistent_ram: uncorrectable error in header
-0-[ 0.097115] persistent_ram: uncorrectable error in header
-0-[ 0.097190] persistent_ram: uncorrectable error in header
-0-[ 0.097211] pstore: using zlib compression
-0-[ 0.097243] console [pstore-1] enabled
-0-[ 0.097389] pstore: Registered ramoops as persistent store backend
-0-[ 0.097396] ramoops: attached 0x20000@0x88000000, ecc: 16/0
-0-[ 0.098192] workingset: timestamp_bits=14 max_order=18 bucket_order=4
-0-[ 0.104728] NFS: Registering the id_resolver key type
-0-[ 0.104749] Key type id_resolver registered
-0-[ 0.104752] Key type id_legacy registered
-0-[ 0.104779] fuse init (API version 7.26)
-0-[ 0.106542] NET: Registered protocol family 38
-0-[ 0.106625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
-0-[ 0.106630] io scheduler noop registered (default)
-0-[ 0.107282] dma ioctl init
-0-[ 0.107685] 18300000.uart: ttyS0 at MMIO 0x18300000 (irq = 133, base_baud = 1500000) is a SPX
-0-[ 0.107725] console [ttyS0] enabled
-0-[ 0.107995] 18400000.uart: ttyS1 at MMIO 0x18400000 (irq = 134, base_baud = 1500000) is a SPX
-0-[ 0.108237] 18200000.uart: ttyS2 at MMIO 0x18200000 (irq = 135, base_baud = 1500000) is a SPX
-0-[ 0.109329] brd: module loaded
-0-[ 0.109336] Loading iSCSI transport class v2.0-870.
-0-[ 0.109613] iscsi: registered transport (tcp)
-0-[ 0.109998] ahci 27000000.sata: forcing port_map 0x0 -> 0x1
-0-[ 0.110040] ahci 27000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
-0-[ 0.110049] ahci 27000000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
-0-[ 0.110061] ahci 27000000.sata: port 0 can do FBS, forcing FBSCP
-0-[ 0.110652] scsi host0: ahci
-0-[ 0.110872] ata1: SATA max UDMA/133 mmio [mem 0x27000000-0x2700017f] port 0x100 irq 148
-0-[ 0.112378] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x51
-0-[ 0.112383] nand: ESMT GD5F1GQ5UEYIG 1G 3.3V 4-bit
-0-[ 0.112388] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
-0-[ 0.112608] libphy: Fixed MDIO Bus: probed
-0-[ 0.112845] PPP generic driver version 2.4.2
-0-[ 0.113005] PPP BSD Compression module registered
-0-[ 0.113009] PPP Deflate Compression module registered
-0-[ 0.113020] PPP MPPE Compression module registered
-0-[ 0.113024] NET: Registered protocol family 24
-0-[ 0.113234] molchip_usb2_phy 28500000.usb2-phy: usb2 phy power on
-0-[ 0.113239] molchip_usb2_phy 28500000.usb2-phy: usb2 phy int
-0-[ 0.114249] molchip_usb2_phy 28500000.usb2-phy: usb2 phy[0] set mode 0x1
-0-[ 0.114264] dwc2 10d00000.dwc2: Core Release: 4.00a (snpsid=4f54400a)
-0-[ 0.114331] dwc2 10d00000.dwc2: DWC OTG Controller
-0-[ 0.114361] dwc2 10d00000.dwc2: new USB bus registered, assigned bus number 1
-0-[ 0.114390] dwc2 10d00000.dwc2: irq 145, io mem 0x00000000
-0-[ 0.114595] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
-0-[ 0.114601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-0-[ 0.114606] usb usb1: Product: DWC OTG Controller
-0-[ 0.114610] usb usb1: Manufacturer: Linux 4.9.138 dwc2_hsotg
-0-[ 0.114614] usb usb1: SerialNumber: 10d00000.dwc2
-0-[ 0.115064] hub 1-0:1.0: USB hub found
-0-[ 0.115092] hub 1-0:1.0: 1 port detected
-0-[ 0.115412] molchip_usb2_phy 28500000.usb2-phy: usb2 phy[0] reset
-0-[ 0.116564] molchip_usb2_phy 28500000.usb2-phy: usb2 phy[1] set mode 0x1
-0-[ 0.116580] dwc2 10e00000.dwc2: Core Release: 4.00a (snpsid=4f54400a)
-0-[ 0.116639] dwc2 10e00000.dwc2: DWC OTG Controller
-0-[ 0.116660] dwc2 10e00000.dwc2: new USB bus registered, assigned bus number 2
-0-[ 0.116680] dwc2 10e00000.dwc2: irq 146, io mem 0x00000000
-0-[ 0.116924] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
-0-[ 0.116931] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-0-[ 0.116935] usb usb2: Product: DWC OTG Controller
-0-[ 0.116939] usb usb2: Manufacturer: Linux 4.9.138 dwc2_hsotg
-0-[ 0.116943] usb usb2: SerialNumber: 10e00000.dwc2
-0-[ 0.117391] hub 2-0:1.0: USB hub found
-0-[ 0.117421] hub 2-0:1.0: 1 port detected
-0-[ 0.117700] molchip_usb2_phy 28500000.usb2-phy: usb2 phy[1] reset
-0-[ 0.118806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-0-[ 0.118810] ehci-platform: EHCI generic platform driver
-0-[ 0.118953] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-0-[ 0.118964] ohci-platform: OHCI generic platform driver
-0-[ 0.119092] usbcore: registered new interface driver uas
-0-[ 0.119161] usbcore: registered new interface driver usb-storage
-0-[ 0.119232] usbcore: registered new interface driver usbserial
-0-[ 0.119259] usbcore: registered new interface driver option
-0-[ 0.119286] usbserial: USB Serial support registered for GSM modem (1-port)
-0-[ 0.119637] mousedev: PS/2 mouse device common for all mice
-0-[ 0.120349] Use extern RTC(rx8563), rtc type = 2
-0-[ 0.120390] i2c /dev entries driver
-0-[ 0.121515] mc_aes 11700000.aes: mc crypto supports aes des tdes
-0-[ 0.121812] cryptodev: driver 1.10 loaded.
-0-[ 0.121867] hidraw: raw HID events driver (C) Jiri Kosina
-0-[ 0.121980] usbcore: registered new interface driver usbhid
-0-[ 0.121983] usbhid: USB HID core driver
-0-[ 0.122134] ip_tables: (C) 2000-2006 Netfilter Core Team
-0-[ 0.122691] NET: Registered protocol family 10
-0-[ 0.123262] NET: Registered protocol family 17
-0-[ 0.123304] 8021q: 802.1Q VLAN Support v1.8
-0-[ 0.123336] Key type dns_resolver registered
-0-[ 0.123473] Registering SWP/SWPB emulation handler
-0-[ 0.123531] HIKBASERD: Loading 303KiB [2 disks] into "/home/hikbase.image"... done.
-0-[ 0.125343] page_owner is disabled
-0-[ 0.130245] hctosys: unable to open rtc device (rtc0)
-0-[ 0.130566] dmaengine: __dma_request_channel: success (dma0chan0)
-0-[ 0.130737] dma64 10200000.dma64: private_candidate: dma0chan0 busy
-0-[ 0.130742] dmaengine: __dma_request_channel: success (dma0chan1)
-0-[ 0.134078] Freeing unused kernel memory: 4096K
-1-[ 0.135824] init(1) called reboot syscall, cmd: 0x0.
-1-[ 1.059848] hik_baseal: loading out-of-tree module taints kernel.
-1-[ 1.061781] hik_baseal 1.0 init success!
-1-[ 1.067076] hik_core: module license 'HIKLICENSE' taints kernel.
-1-[ 1.067082] Disabling lock debugging due to kernel taint
-1-[ 1.068771] [HKBSP]HIK-BSP version #56869[kernel:56716] v2.5.0 build 2021-02-04
-1-[ 1.069030] [HKBSP]start parsing ARGS: 'mem=640M console=ttyS0,115200n8 hkvs.partition=0x600@0x8f000000 hkvs.mem=totalmem:1024M,kmem:640M,emem:384M hkvs.board=pcb:0x80421,board:0xb700,processor:0x23 hkvs.device=devclass:0x5f5,devtype:0xb632 hkvs.end=end noinitrd ip=192.0.0.64:192.0.0.128:192.0.0.1:255.255.255.0:Hik-eth:eth0:none
-1-[ 1.069030] '
-1-[ 1.069127] [HKBSP]Ignoring unrecognised tag 0x54410001
-1-[ 1.069131] [HKBSP]Ignoring unrecognised tag 0x54410009
-1-[ 1.069135] [HKBSP]cpldinfo offset[0x280000], size[0x100].
-1-[ 1.069140] [HKBSP]bootparam offset[0x284000], size[0x200].
-1-[ 1.069143] [HKBSP]Ignoring unrecognised tag 0x484b0005
-1-[ 1.084350] [HKBSP]Find the platform(MOLBVT).
-1-[ 1.084432] GROUP[1b000000.gpio] : group[0].pin_base[0] ----> gpiolib gpio_base[496], pin_num[16]
-1-[ 1.084441] GROUP[1b100000.gpio] : group[1].pin_base[16] ----> gpiolib gpio_base[480], pin_num[16]
-1-[ 1.084451] GROUP[1b200000.gpio] : group[2].pin_base[32] ----> gpiolib gpio_base[464], pin_num[16]
-1-[ 1.084463] GROUP[1b300000.gpio] : group[3].pin_base[48] ----> gpiolib gpio_base[448], pin_num[16]
-1-[ 1.084477] GROUP[1b400000.gpio] : group[4].pin_base[64] ----> gpiolib gpio_base[432], pin_num[16]
-1-[ 1.088744] Creating 4 MTD partitions on "spi_nfc":
-1-[ 1.088754] 0x000000400000-0x000003800000 : "flash_sys0"
-1-[ 1.149056] 0x000003800000-0x000006c00000 : "flash_sys1"
-1-[ 1.209313] 0x000007000000-0x000008000000 : "data_config"
-1-[ 1.228296] 0x000006c00000-0x000007000000 : "rev"
-1-[ 1.242493] Use extern RTC(rx8563), rtc type = 2
-1-[ 1.275164] hkbal_of_property [phy-mode] [set].
-1-[ 1.275220] hkbal_of_property [phy-handle] [set].
-1-[ 1.275243] hkbal_of_property [status] [set].
-1-[ 1.275699] dwceqos 1b900000.ethernet: mdio set csr rate (100000000)
-1-[ 1.275791] libphy: DWCEQOS MII bus: probed
-1-[ 1.655405] MOLCHIP 10/100Mbps Ethernet 1b900000:0a: attached PHY driver [MOLCHIP 10/100Mbps Ethernet] (mii_bus:phy_addr=1b900000:0a, irq=-1)
-1-[ 1.655504] dwceqos 1b900000.ethernet: pdev->id -1, baseaddr 0x1b900000, irq 239
-1-[ 1.769757] ahci not support Staggered Spin-up!
-1-[ 1.775542] hik_rtc_probe
-1-[ 1.789978] PCF8563 0-0051: rtc core: registered PCF8563 as rtc0
-1-[ 1.803469] <0>rtc: [2022-07-15 11:08:10],week is 5
-0-[ 1.925364] random: fast init done
-0-[ 2.315149] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
-0-[ 2.315454] ata1.00: ATA-10: WDC WD20PURX-64AKYY0, 80.00B80, max UDMA/133
-0-[ 2.315460] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
-0-[ 2.315772] ata1.00: configured for UDMA/133
-0-[ 2.316163] scsi 0:0:0:0: Direct-Access ATA WDC WD20PURX-64A 0B80 PQ: 0 ANSI: 5
-1-[ 2.395667] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
-1-[ 2.395675] sd 0:0:0:0: [sda] 4096-byte physical blocks
-1-[ 2.395863] sd 0:0:0:0: [sda] Write Protect is off
-1-[ 2.395870] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
-1-[ 2.395941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-1-[ 2.472536] sd 0:0:0:0: [sda] Attached SCSI disk
-0-[ 3.604690] libphy: GPIO MII Bus: probed
-0-[ 3.645460] libphy: GPIO MII Bus: probed
-1-[ 4.038208] random: sleep: uninitialized urandom read (4 bytes read)
-1-[ 5.047244] random: S31devs: uninitialized urandom read (4 bytes read)
-1-[ 5.049535] random: mknod: uninitialized urandom read (4 bytes read)
-0-[ 5.052161] random: S40distmnt: uninitialized urandom read (4 bytes read)
-1-[ 5.238109] dwceqos 1b900000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
-1-[ 5.238281] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
-1-[ 5.311693] ubi0: attaching mtd0
-1-[ 5.590825] ubi0: scanning is finished
-1-[ 5.597777] ubi0: attached mtd0 (name "flash_sys0", size 52 MiB)
-1-[ 5.597785] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
-1-[ 5.597789] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
-1-[ 5.597793] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
-1-[ 5.597797] ubi0: good PEBs: 416, bad PEBs: 0, corrupted PEBs: 0
-1-[ 5.597800] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
-1-[ 5.597805] ubi0: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 982697971
-1-[ 5.597809] ubi0: available PEBs: 0, total reserved PEBs: 416, PEBs reserved for bad PEB handling: 20
-1-[ 5.599279] ubi0: background thread "ubi_bgt0d" started, PID 233
-1-[ 5.605306] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 236
-0-[ 5.641856] UBIFS (ubi0:0): recovery needed
-0-[ 5.727279] UBIFS (ubi0:0): recovery completed
-0-[ 5.727338] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "sys0"
-0-[ 5.727344] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
-0-[ 5.727351] UBIFS (ubi0:0): FS size: 48504832 bytes (46 MiB, 382 LEBs), journal size 2412544 bytes (2 MiB, 19 LEBs)
-0-[ 5.727354] UBIFS (ubi0:0): reserved for root: 2291002 bytes (2237 KiB)
-0-[ 5.727361] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 2F675B41-011C-4F1D-BDC7-408921D4BB81, small LPT model
-1-[ 5.736490] ubi1: attaching mtd1
-1-[ 6.014203] ubi1: scanning is finished
-1-[ 6.021098] ubi1: attached mtd1 (name "flash_sys1", size 52 MiB)
-1-[ 6.021106] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
-1-[ 6.021111] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
-1-[ 6.021114] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
-1-[ 6.021118] ubi1: good PEBs: 416, bad PEBs: 0, corrupted PEBs: 0
-1-[ 6.021122] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
-1-[ 6.021129] ubi1: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 2124180869
-1-[ 6.021133] ubi1: available PEBs: 0, total reserved PEBs: 416, PEBs reserved for bad PEB handling: 20
-1-[ 6.022547] ubi1: background thread "ubi_bgt1d" started, PID 239
-0-[ 6.035188] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 242
-1-[ 6.064464] UBIFS (ubi1:0): recovery needed
-1-[ 6.150087] UBIFS (ubi1:0): recovery completed
-1-[ 6.150144] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "sys1"
-1-[ 6.150151] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
-1-[ 6.150158] UBIFS (ubi1:0): FS size: 48504832 bytes (46 MiB, 382 LEBs), journal size 2412544 bytes (2 MiB, 19 LEBs)
-1-[ 6.150162] UBIFS (ubi1:0): reserved for root: 2291002 bytes (2237 KiB)
-1-[ 6.150168] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 861B7691-6477-43EC-90FE-93417C10E9BD, small LPT model
-0-[ 6.159351] ubi2: attaching mtd2
-1-[ 6.246466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
-0-[ 6.249129] ubi2: scanning is finished
-0-[ 6.255923] ubi2: attached mtd2 (name "data_config", size 16 MiB)
-0-[ 6.255932] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
-0-[ 6.255936] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
-0-[ 6.255939] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
-0-[ 6.255943] ubi2: good PEBs: 128, bad PEBs: 0, corrupted PEBs: 0
-0-[ 6.255947] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
-0-[ 6.255952] ubi2: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1032029183
-0-[ 6.255958] ubi2: available PEBs: 0, total reserved PEBs: 128, PEBs reserved for bad PEB handling: 20
-1-[ 6.257037] ubi2: background thread "ubi_bgt2d" started, PID 245
-0-[ 6.279884] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 248
-0-[ 6.297730] UBIFS (ubi2:0): recovery needed
-0-[ 6.385454] UBIFS (ubi2:0): recovery completed
-0-[ 6.385511] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "cfg"
-0-[ 6.385518] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
-0-[ 6.385524] UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
-0-[ 6.385528] UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
-0-[ 6.385534] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID AD5C6A26-F039-4739-A0CB-90B75B0E1B66, small LPT model
-1-[ 24.271447] load mmz.ko OK!
-1-[ 24.274667] load fy_media.ko OK!
-1-[ 24.279581] load fybase.ko OK!
-1-[ 24.284980] load sys.ko OK!
-1-[ 24.295867] load vpu.ko ok!
-1-[ 24.301296] vou:_vou_clk_on
-1-[ 24.302176] load vou.ko OK!
-1-[ 24.306373] video_param_vram_size: id[0] size[17280]
-1-[ 24.306382] video_param_vram_size: id[1] size[0]
-1-[ 24.306385] video_param_vram_size: id[2] size[128]
-1-[ 24.306389] video_param_vram_size: id[3] size[0]
-1-[ 24.310412] load fyfb.ko OK!
-1-[ 24.313599] sccoef_calc_init
-1-[ 24.320149] load vppu.ko OK!
-1-[ 24.325450] load jpeg.ko OK!
-1-[ 24.375598] load vdu.ko OK!
-1-[ 24.397718] load i2s.ko OK!
-0-[ 24.420355] regIdx 0x0 value 0x4
-0-[ 24.420753] regIdx 0x1 value 0x0
-0-[ 24.421146] regIdx 0x2 value 0x15
-0-[ 24.421538] regIdx 0x3 value 0x0
-0-[ 24.421929] regIdx 0x4 value 0x0
-0-[ 24.422320] regIdx 0x5 value 0x0
-0-[ 24.422711] regIdx 0x6 value 0x0
-0-[ 24.423103] regIdx 0x7 value 0x0
-0-[ 24.423494] regIdx 0x8 value 0x0
-0-[ 24.423885] regIdx 0x9 value 0x0
-0-[ 24.424276] regIdx 0xa value 0x0
-0-[ 24.424668] regIdx 0xb value 0x0
-0-[ 24.425059] regIdx 0xc value 0x0
-0-[ 24.425456] regIdx 0xd value 0x0
-0-[ 24.425850] regIdx 0xe value 0x0
-0-[ 24.426243] regIdx 0xf value 0x0
-0-[ 24.426636] regIdx 0x10 value 0x0
-0-[ 24.427029] regIdx 0x11 value 0x0
-0-[ 24.427422] regIdx 0x12 value 0x0
-0-[ 24.427814] regIdx 0x13 value 0x0
-0-[ 24.428207] regIdx 0x14 value 0x0
-0-[ 24.428600] regIdx 0x15 value 0x0
-0-[ 24.428993] regIdx 0x16 value 0x0
-0-[ 24.429386] regIdx 0x17 value 0x0
-0-[ 24.429778] regIdx 0x18 value 0x0
-0-[ 24.430171] regIdx 0x19 value 0x0
-0-[ 24.430563] regIdx 0x1a value 0x0
-0-[ 24.430956] regIdx 0x1b value 0x0
-0-[ 24.431349] regIdx 0x1c value 0x39
-0-[ 24.431743] regIdx 0x1d value 0xe9
-0-[ 24.432135] regIdx 0x1e value 0x0
-0-[ 24.432528] regIdx 0x1f value 0xa
-0-[ 24.432921] regIdx 0x20 value 0x0
-0-[ 24.433313] regIdx 0x21 value 0xff
-0-[ 24.433706] regIdx 0x22 value 0x0
-0-[ 24.434099] regIdx 0x23 value 0xff
-0-[ 24.434492] regIdx 0x24 value 0x0
-0-[ 24.434884] regIdx 0x25 value 0x2c
-0-[ 24.435279] regIdx 0x26 value 0x2c
-0-[ 24.435673] regIdx 0x27 value 0x0
-0-[ 24.436066] regIdx 0x28 value 0x0
-0-[ 24.436459] regIdx 0x29 value 0x0
-0-[ 24.436852] regIdx 0x2a value 0x0
-0-[ 24.437244] regIdx 0x2b value 0x0
-0-[ 24.437637] regIdx 0x2c value 0xb
-0-[ 24.438030] regIdx 0x2d value 0x0
-0-[ 24.438423] regIdx 0x2e value 0xc
-0-[ 24.438818] regIdx 0x2f value 0xe9
-0-[ 24.439211] regIdx 0x30 value 0x0
-0-[ 24.439604] regIdx 0x31 value 0x0
-0-[ 24.439997] regIdx 0x32 value 0x10
-0-[ 24.440389] regIdx 0x33 value 0x100
-0-[ 24.440782] regIdx 0x34 value 0x0
-0-[ 24.441175] regIdx 0x35 value 0x0
-0-[ 24.441568] regIdx 0x36 value 0x0
-0-[ 24.441961] regIdx 0x37 value 0x0
-0-[ 24.442353] regIdx 0x38 value 0x0
-0-[ 24.442746] regIdx 0x39 value 0x0
-0-[ 24.443139] regIdx 0x3a value 0x0
-0-[ 24.443531] regIdx 0x3b value 0x1a
-0-[ 24.443924] regIdx 0x3c value 0x124
-0-[ 24.444317] regIdx 0x3d value 0x0
-0-[ 24.444709] regIdx 0x3e value 0x0
-0-[ 24.445102] regIdx 0x3f value 0x0
-0-[ 24.445496] regIdx 0x40 value 0x4
-0-[ 24.445888] regIdx 0x41 value 0x0
-0-[ 24.446280] regIdx 0x42 value 0x0
-0-[ 24.446671] regIdx 0x43 value 0x0
-0-[ 24.447063] regIdx 0x44 value 0x0
-0-[ 24.447455] regIdx 0x45 value 0x0
-0-[ 24.447846] regIdx 0x46 value 0x0
-0-[ 24.448238] regIdx 0x47 value 0x0
-0-[ 24.448629] regIdx 0x48 value 0x0
-0-[ 24.449021] regIdx 0x49 value 0x0
-0-[ 24.449413] regIdx 0x4a value 0x0
-0-[ 24.449804] regIdx 0x4b value 0x0
-0-[ 24.450196] regIdx 0x4c value 0x0
-0-[ 24.450587] regIdx 0x4d value 0x0
-0-[ 24.450979] regIdx 0x4e value 0x0
-0-[ 24.451371] regIdx 0x4f value 0x0
-0-[ 24.451762] regIdx 0x50 value 0x0
-0-[ 24.452154] regIdx 0x51 value 0x0
-0-[ 24.452546] regIdx 0x52 value 0x0
-0-[ 24.452937] regIdx 0x53 value 0x0
-0-[ 24.453329] regIdx 0x54 value 0x0
-0-[ 24.453720] regIdx 0x55 value 0x0
-0-[ 24.454111] regIdx 0x56 value 0x0
-0-[ 24.454504] regIdx 0x57 value 0x0
-0-[ 24.454895] regIdx 0x58 value 0x0
-0-[ 24.455289] regIdx 0x59 value 0x0
-0-[ 24.455683] regIdx 0x5a value 0x0
-0-[ 24.456076] regIdx 0x5b value 0x0
-0-[ 24.456470] regIdx 0x5c value 0x39
-0-[ 24.456863] regIdx 0x5d value 0xe9
-0-[ 24.457256] regIdx 0x5e value 0x0
-0-[ 24.457649] regIdx 0x5f value 0xa
-0-[ 24.458041] regIdx 0x60 value 0x0
-0-[ 24.458434] regIdx 0x61 value 0xff
-0-[ 24.458827] regIdx 0x62 value 0x0
-0-[ 24.459219] regIdx 0x63 value 0xff
-0-[ 24.459612] regIdx 0x64 value 0x0
-0-[ 24.460005] regIdx 0x65 value 0x2c
-0-[ 24.460397] regIdx 0x66 value 0x2c
-0-[ 24.460790] regIdx 0x67 value 0x0
-0-[ 24.461182] regIdx 0x68 value 0x0
-0-[ 24.461575] regIdx 0x69 value 0x0
-0-[ 24.461968] regIdx 0x6a value 0x0
-0-[ 24.462361] regIdx 0x6b value 0x0
-0-[ 24.462753] regIdx 0x6c value 0xb
-0-[ 24.463146] regIdx 0x6d value 0x0
-0-[ 24.463539] regIdx 0x6e value 0xc
-0-[ 24.463932] regIdx 0x6f value 0xe9
-0-[ 24.464324] regIdx 0x70 value 0x0
-0-[ 24.464717] regIdx 0x71 value 0x0
-0-[ 24.465110] regIdx 0x72 value 0x10
-0-[ 24.465502] regIdx 0x73 value 0x100
-0-[ 24.465894] regIdx 0x74 value 0x0
-0-[ 24.466286] regIdx 0x75 value 0x0
-0-[ 24.466678] regIdx 0x76 value 0x0
-0-[ 24.467069] regIdx 0x77 value 0x0
-0-[ 24.467461] regIdx 0x78 value 0x0
-0-[ 24.467852] regIdx 0x79 value 0x0
-0-[ 24.468244] regIdx 0x7a value 0x0
-0-[ 24.468636] regIdx 0x7b value 0x1a
-0-[ 24.469027] regIdx 0x7c value 0x124
-0-[ 24.469419] regIdx 0x7d value 0x0
-0-[ 24.469811] regIdx 0x7e value 0x0
-0-[ 24.470202] regIdx 0x7f value 0x0
-0-[ 24.470594] regIdx 0x80 value 0x4
-0-[ 24.470986] regIdx 0x81 value 0x0
-0-[ 24.471377] regIdx 0x82 value 0x0
-0-[ 24.471769] regIdx 0x83 value 0x0
-0-[ 24.472160] regIdx 0x84 value 0x0
-0-[ 24.472552] regIdx 0x85 value 0x0
-0-[ 24.472944] regIdx 0x86 value 0x0
-0-[ 24.473335] regIdx 0x87 value 0x0
-0-[ 24.473727] regIdx 0x88 value 0x0
-0-[ 24.474118] regIdx 0x89 value 0x0
-0-[ 24.474511] regIdx 0x8a value 0x0
-0-[ 24.474902] regIdx 0x8b value 0x0
-0-[ 24.475296] regIdx 0x8c value 0x0
-0-[ 24.475690] regIdx 0x8d value 0x0
-0-[ 24.476082] regIdx 0x8e value 0x0
-0-[ 24.476475] regIdx 0x8f value 0x0
-0-[ 24.476868] regIdx 0x90 value 0x0
-0-[ 24.477261] regIdx 0x91 value 0x0
-0-[ 24.477654] regIdx 0x92 value 0x0
-0-[ 24.478046] regIdx 0x93 value 0x0
-0-[ 24.478439] regIdx 0x94 value 0x0
-0-[ 24.478832] regIdx 0x95 value 0x0
-0-[ 24.479224] regIdx 0x96 value 0x0
-0-[ 24.479617] regIdx 0x97 value 0x0
-0-[ 24.480010] regIdx 0x98 value 0x0
-0-[ 24.480403] regIdx 0x99 value 0x0
-0-[ 24.480795] regIdx 0x9a value 0x0
-0-[ 24.481188] regIdx 0x9b value 0x0
-0-[ 24.481582] regIdx 0x9c value 0x39
-0-[ 24.481975] regIdx 0x9d value 0xe9
-0-[ 24.482367] regIdx 0x9e value 0x0
-0-[ 24.482760] regIdx 0x9f value 0xa
-0-[ 24.483153] regIdx 0xa0 value 0x0
-0-[ 24.483546] regIdx 0xa1 value 0xff
-0-[ 24.483938] regIdx 0xa2 value 0x0
-0-[ 24.484331] regIdx 0xa3 value 0xff
-0-[ 24.484724] regIdx 0xa4 value 0x0
-0-[ 24.485124] regIdx 0xa5 value 0x2c
-0-[ 24.485517] regIdx 0xa6 value 0x2c
-0-[ 24.485910] regIdx 0xa7 value 0x0
-0-[ 24.486303] regIdx 0xa8 value 0x0
-0-[ 24.486695] regIdx 0xa9 value 0x0
-0-[ 24.487088] regIdx 0xaa value 0x0
-0-[ 24.487481] regIdx 0xab value 0x0
-0-[ 24.487874] regIdx 0xac value 0xb
-0-[ 24.488266] regIdx 0xad value 0x0
-0-[ 24.488659] regIdx 0xae value 0xc
-0-[ 24.489052] regIdx 0xaf value 0xe9
-0-[ 24.489444] regIdx 0xb0 value 0x0
-0-[ 24.489837] regIdx 0xb1 value 0x0
-0-[ 24.490229] regIdx 0xb2 value 0x10
-0-[ 24.490622] regIdx 0xb3 value 0x100
-0-[ 24.491015] regIdx 0xb4 value 0x0
-0-[ 24.491408] regIdx 0xb5 value 0x0
-0-[ 24.491801] regIdx 0xb6 value 0x0
-0-[ 24.492194] regIdx 0xb7 value 0x0
-0-[ 24.492587] regIdx 0xb8 value 0x0
-0-[ 24.492979] regIdx 0xb9 value 0x0
-0-[ 24.493372] regIdx 0xba value 0x0
-0-[ 24.493765] regIdx 0xbb value 0x1a
-0-[ 24.494158] regIdx 0xbc value 0x124
-0-[ 24.494550] regIdx 0xbd value 0x0
-0-[ 24.494943] regIdx 0xbe value 0x0
-0-[ 24.495337] regIdx 0xbf value 0x0
-0-[ 24.495730] regIdx 0xc0 value 0x4
-0-[ 24.496122] regIdx 0xc1 value 0x0
-0-[ 24.496515] regIdx 0xc2 value 0x0
-0-[ 24.496908] regIdx 0xc3 value 0x0
-0-[ 24.497301] regIdx 0xc4 value 0x0
-0-[ 24.497694] regIdx 0xc5 value 0x0
-0-[ 24.498086] regIdx 0xc6 value 0x0
-0-[ 24.498479] regIdx 0xc7 value 0x0
-0-[ 24.498872] regIdx 0xc8 value 0x0
-0-[ 24.499264] regIdx 0xc9 value 0x0
-0-[ 24.499657] regIdx 0xca value 0x0
-0-[ 24.500050] regIdx 0xcb value 0x0
-0-[ 24.500442] regIdx 0xcc value 0x0
-0-[ 24.500835] regIdx 0xcd value 0x0
-0-[ 24.501228] regIdx 0xce value 0x0
-0-[ 24.501620] regIdx 0xcf value 0x0
-0-[ 24.502013] regIdx 0xd0 value 0x0
-0-[ 24.502406] regIdx 0xd1 value 0x0
-0-[ 24.502799] regIdx 0xd2 value 0x0
-0-[ 24.503192] regIdx 0xd3 value 0x0
-0-[ 24.503584] regIdx 0xd4 value 0x0
-0-[ 24.503977] regIdx 0xd5 value 0x0
-0-[ 24.504370] regIdx 0xd6 value 0x0
-0-[ 24.504762] regIdx 0xd7 value 0x0
-0-[ 24.505156] regIdx 0xd8 value 0x0
-0-[ 24.505549] regIdx 0xd9 value 0x0
-0-[ 24.505942] regIdx 0xda value 0x0
-0-[ 24.506334] regIdx 0xdb value 0x0
-0-[ 24.506728] regIdx 0xdc value 0x39
-0-[ 24.507121] regIdx 0xdd value 0xe9
-0-[ 24.507513] regIdx 0xde value 0x0
-0-[ 24.507906] regIdx 0xdf value 0xa
-0-[ 24.508299] regIdx 0xe0 value 0x0
-0-[ 24.508691] regIdx 0xe1 value 0xff
-0-[ 24.509084] regIdx 0xe2 value 0x0
-0-[ 24.509477] regIdx 0xe3 value 0xff
-0-[ 24.509869] regIdx 0xe4 value 0x0
-0-[ 24.510262] regIdx 0xe5 value 0x2c
-0-[ 24.510655] regIdx 0xe6 value 0x2c
-0-[ 24.511048] regIdx 0xe7 value 0x0
-0-[ 24.511440] regIdx 0xe8 value 0x0
-0-[ 24.511833] regIdx 0xe9 value 0x0
-0-[ 24.512226] regIdx 0xea value 0x0
-0-[ 24.512618] regIdx 0xeb value 0x0
-0-[ 24.513011] regIdx 0xec value 0xb
-0-[ 24.513403] regIdx 0xed value 0x0
-0-[ 24.513796] regIdx 0xee value 0xc
-0-[ 24.514189] regIdx 0xef value 0xe9
-0-[ 24.514582] regIdx 0xf0 value 0x0
-0-[ 24.514974] regIdx 0xf1 value 0x0
-0-[ 24.515368] regIdx 0xf2 value 0x10
-0-[ 24.515761] regIdx 0xf3 value 0x100
-0-[ 24.516153] regIdx 0xf4 value 0x0
-0-[ 24.516546] regIdx 0xf5 value 0x0
-0-[ 24.516939] regIdx 0xf6 value 0x0
-0-[ 24.517332] regIdx 0xf7 value 0x0
-0-[ 24.517725] regIdx 0xf8 value 0x0
-0-[ 24.518117] regIdx 0xf9 value 0x0
-0-[ 24.518510] regIdx 0xfa value 0x0
-0-[ 24.518903] regIdx 0xfb value 0x1a
-0-[ 24.519295] regIdx 0xfc value 0x124
-0-[ 24.519688] regIdx 0xfd value 0x0
-0-[ 24.520081] regIdx 0xfe value 0x0
-0-[ 24.520083] nau88c10 init finish!
-0-[ 24.520084] *** nau88c10 driver init successful! ***
-0-[ 24.626664] vca_encrypt: version magic '3.18.20 SMP mod_unload ARMv7 p2v8 ' should be '4.9.138 SMP mod_unload ARMv7 p2v8 '
-0-[ 24.626851] vca_encrypt: version magic '3.18.20 SMP mod_unload ARMv7 p2v8 ' should be '4.9.138 SMP mod_unload ARMv7 p2v8 '
-0-[ 24.655856] nf_conntrack version 0.5.0 (10240 buckets, 40960 max)
-0-[ 24.701772] iscsid (384): /proc/384/oom_adj is deprecated, please use /proc/384/oom_score_adj instead.
-1-[ 25.742961] start.sh (255): drop_caches: 3
-0-[ 26.786441] [HKBSP][hik_bsp mc,wdt.0][HIK]hikwdt:set heartbeat range error, t = 600
-0-[ 26.786449] [HKBSP][hik_bsp mc,wdt.0][HIK]hikwdt:force heartbeat to 516
-1-[ 28.158034] dwceqos 1b900000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
-1-[ 29.313353] device eth0 entered promiscuous mode
-0-[ 29.500339] random: crng init done
-0-[ 29.500349] random: 6 urandom warning(s) missed due to ratelimiting
-0-[ 51.386334] SYS_QueryState called!
-0-[ 51.471772] set master div enter i2s-1,div=0,mclk=24000000,bus_width=32,fs=8000
-0-[ 51.471985] dma64 10200000.dma64: private_candidate: dma0chan0 busy
-0-[ 51.471991] dma64 10200000.dma64: private_candidate: dma0chan1 busy
-0-[ 51.471998] dmaengine: __dma_request_channel: success (dma0chan2)
-0-[ 51.472016] dma dma0chan2: cyclic prepared buf 0xa0c20000 len 3840 period 1280 periods 3
-0-[ 51.575288] set master div enter i2s-3,div=0,mclk=100000000,bus_width=64,fs=32000
-0-[ 51.575947] dma64 10200000.dma64: private_candidate: dma0chan0 busy
-0-[ 51.575954] dma64 10200000.dma64: private_candidate: dma0chan1 busy
-0-[ 51.575958] dma64 10200000.dma64: private_candidate: dma0chan2 busy
-0-[ 51.575964] dmaengine: __dma_request_channel: success (dma0chan3)
-0-[ 51.575985] dma dma0chan3: cyclic prepared buf 0xa0c60000 len 30720 period 10240 periods 3
-0-[ 51.685467] dma64 10200000.dma64: private_candidate: dma0chan0 busy
-0-[ 51.685478] dma64 10200000.dma64: private_candidate: dma0chan1 busy
-0-[ 51.685482] dma64 10200000.dma64: private_candidate: dma0chan2 busy
-0-[ 51.685486] dma64 10200000.dma64: private_candidate: dma0chan3 busy
-0-[ 51.685492] dmaengine: __dma_request_channel: success (dma0chan4)
-0-[ 51.685515] dma dma0chan4: cyclic prepared buf 0xa0c00000 len 3840 period 1280 periods 3
-0-[ 53.153696] vou:_vou_soft_reset[0]
-0-[ 53.153704] vou:_vou_soft_reset[1]
-0-[ 53.153736] vou:[0]_vou_cmd_set_dev_output_info[1280x720/1/60]74250kHz -> 74250kHz
-0-[ 53.153740] vou:[0]_vou_cmd_toggle_dev=1
-0-[ 53.153748] vou:[0]set_hdmi_cfg set eb=1!
-0-[ 53.153815] vou:[0]kick off start device done!
-0-[ 53.154143] vou:[0]{18}_vou_cmd_set_gui_layer_info set region(0,0,1280,720)!
-0-[ 54.165751] vou:[0]{18}_vou_cmd_set_gui_layer_info set region(0,0,1280,720)!
-0-[ 54.165968] vou:[0]{19}_vou_cmd_set_gui_layer_info set region(0,0,32,32)!
-0-[ 55.175412] vou:[0]{19}_vou_cmd_set_gui_layer_info set region(0,0,32,32)!
-0-[ 55.336661] ======e6ac7cc0 e6ac7cd0======
-0-[ 55.336689] efuse : keylen(16) entry(32)
-1-[ 65.747929] dma64 10200000.dma64: private_candidate: dma0chan0 busy
-1-[ 65.747937] dma64 10200000.dma64: private_candidate: dma0chan1 busy
-1-[ 65.747941] dma64 10200000.dma64: private_candidate: dma0chan2 busy
-1-[ 65.747945] dma64 10200000.dma64: private_candidate: dma0chan3 busy
-1-[ 65.747950] dma64 10200000.dma64: private_candidate: dma0chan4 busy
-1-[ 65.747956] dmaengine: __dma_request_channel: success (dma0chan5)
-1-[ 65.752820] dma64 10200000.dma64: private_candidate: dma0chan0 busy
-1-[ 65.752828] dma64 10200000.dma64: private_candidate: dma0chan1 busy
-1-[ 65.752833] dma64 10200000.dma64: private_candidate: dma0chan2 busy
-1-[ 65.752837] dma64 10200000.dma64: private_candidate: dma0chan3 busy
-1-[ 65.752842] dma64 10200000.dma64: private_candidate: dma0chan4 busy
-1-[ 65.752846] dma64 10200000.dma64: private_candidate: dma0chan5 busy
-1-[ 65.752852] dmaengine: __dma_request_channel: success (dma0chan6)
-1-[ 66.313048] warning: process `taskStartSntpCl' used the deprecated sysctl system call with
-1-[ 66.313059] 1.
-1-[ 66.313062] 40.
-1-[ 66.313063]
-0-[ 352.072678] appweb-worker.0 (661): drop_caches: 3
#Can anyone running the Hik firmware on a C800 ( I91BM01) confirm whether it changes the stream configuration options? Specifically, I'm wondering if you can configure the main stream to be H.264. I believe H.265+ is the only available codec on the main stream in the Annke firmware and I'd like to run H.264 to improve compatibility.
What are the settings to get the Hikvision FW powered Annke into BI?
I always get the wrong Port/Username/Password error. Username und Password are correct, i've tested the "generic RTSP" and the "Hikvision other RTSP"-Settings.
All ports are default.
I have a C500 which i've upgraded months ago and never bothered installing it until today.
I always get the wrong Port/Username/Password error. Username und Password are correct, i've tested the "generic RTSP" and the "Hikvision other RTSP"-Settings.
All ports are default.
I have a C500 which i've upgraded months ago and never bothered installing it until today.
No one? I can't understand why the C800 has no H264 support... Is this a Hard- or Software issue?
Successfully updated C500 with hikvision IPC_E7S_EN_STD_5.5.800_210816 firmware from IPC_E7S_EN_STD_5.5.111_200908 using the SDK tool. Happy to find some new nice features like the screenshot with the alert email and the ftp.
Now I also have 4 W300 but I cannot make the link between the ANNKE model (I71GP) and the hikvision platform. If anybody can help. Thank you in advance
Now I also have 4 W300 but I cannot make the link between the ANNKE model (I71GP) and the hikvision platform. If anybody can help. Thank you in advance
tell me, I have I51DM cameras Firmware Version Property C-R-E8-0 (I assume E8 platform) help me find firmware from hikvision
Hello,
I also have an I51DM camera in C-R-E8-0 version.
No Firmware works...
Do you have a solution ?
I also have an I51DM camera in C-R-E8-0 version.
No Firmware works...
Do you have a solution ?
alastairstevenson
Staff member
Did you try this E8 firmware?
This version fixes the latest CVE-2021-36260 vulnerability.
updated via sdk, firmware IPCE_R_E8_EN_STD_5.5.800_210628.zip human detection disappeared, h264 appeared, Resolution changes sub-stream 1280*720, and some other changes. the firmware on the annke website is only for another platform. Visually, the web interface works faster. the inscription on the screen annke did not disappear.
After I upgraded from Annke the resolution went down to 4MP, before the firmware upgrade the resolution showing was 2592 x 1944, after the Hikvision firmware upgrade the resolution was 2560 * 1440 4mp, is this what happened to you also ?
dison4linux
Young grasshopper
Yes, this happened to me as well.
Annke has released an updated firmware that's not quite as new, but I prefer to run that with the proper resolution and aspect ratio over the latest from HikVision with the issue you mentioned.