Bob Schulz
Pulling my weight
That fixed it. Thank you!Sounds like your overlays are not set properly. Go into Macros in BIT and set them up again.
That fixed it. Thank you!Sounds like your overlays are not set properly. Go into Macros in BIT and set them up again.
Maybe should add (temp disabled until next update) in the OP?? =)Multiple locations will be back in the next update.
Maybe should add (temp disabled until next update) in the OP?? =)
Apologies. My temp was meant to be temporary not temperature. All of the single station stuff works fine and puts it into the txt folder under Blue Iris Tools. THe multiple locations however does not currently work and there is nothing that I can find that actually says that. So, I had to ask here and just above, Mike said that it would be in the next update.?? You must have the macro wrong. The temp works...
As of right now it can be Imperial or Metric only. You can create a BIT Add-on to do this for you, though.Hi Mike.
Thanks for getting BIT back up and running so quickly.
I have re-enabled it, but I am getting my temperature in Fahrenheit instead of Celcius.
I know I change between IMPERIAL and METRIC, but reviously I have my temperature in C and my wind speed in MPH.
Is that still possible, or have I missed/forgotten something ?
Thanks.
As of right now it can be Imperial or Metric only. You can create a BIT Add-on to do this for you, though.
Yes. In previous versions of BIT the conversions for Celsius and km/h were done in BIT itself because the values were delivered from WU in F and MPH (Imperial). Now they allow us to specify Metric or Imperial in the API, so to cut any miscalculation or issues out, I decided to show all values exactly how they are delivered from WU. At least for now to get weather working again and push out an update as fast as I could.OK, so something changed ?
I'll have a look at the Add-on - are there instructions for it in the HELP thread ?
That's what you use now, and what BIT has been using since day 1.In the Future update will we be able to use PWS for the weather info?
Oh. Eventually I am hoping to do this, but it's not in the immediately plans just yet.Sorry Not Weather underground, I have got away from them. PWS Weather, Ambient Weather or even Dark Sky?
Hi,
I have the BIT update installed but I cannot configure multiple locations. Is there any way to do it?
Thank you
ThanksSee previous page in this thread. Next update should fix this.
No there isn't, you would have to create an add-on for it.Hey Mike, is there a way to round the temperature, humidity, and dewpoint to the nearest whole number? I looked at the addons feature of BITools but couldn't get it to work. Any help would be appreciated! Thanks!
Airport station sources (METAR) are not working in the current version. Mike said they will in a later release.I am wanting to get weather from an airport station but I am getting the error "Error connecting to wunderground. Check your internet connection / station ID". A post from May 19, 2016 indicated someone was using KAUS as the Station ID which is the Austin-Bergstron International Airport station and was successfully getting results from that station. I have tried several different airport Station IDs with no luck. Non-airport Station IDs work without issue.