{"dateTime": "1593644580.0", "usUnits": "1.0", "interval_minute": "1.0", "rxCheckPercent": "100.0", "outTemp_F": "82.7", "highOutTemp": "82.7", "lowOutTemp": "82.6", "rain_in": "0.0", "rainRate_inch_per_hour": "0.0", "barometer_inHg": "29.858", "radiation_Wpm2": "348.0", "wind_samples": "24.0", "inTemp_F": "78.2", "inHumidity": "33.0", "outHumidity": "81.0", "windSpeed_mph": "2.0", "windGust_mph": "3.0", "windGustDir": "90.0", "windDir": "90.0", "UV": "1.4", "ET_in": "0.0", "highRadiation": "348.0", "highUV": "1.4", "forecastRule": "45.0", "txBatteryStatus": "0.0", "consBatteryVoltage_volt": "4.66", "pressure_inHg": "28.822453093803816", "altimeter_inHg": "29.924291962992914", "appTemp_F": "92.67790403547852", "beaufort_count": "1.0", "cloudbase_foot": "2496.3573062008677", "dewpoint_F": "76.25682785271619", "heatindex_F": "90.83359196680006", "humidex_F": "104.10769286299869", "inDewpoint_F": "46.720287246576476", "maxSolarRad_Wpm2": "420.24955654360963", "windchill_F": "82.7", "windrun_mile": "0.03333333333333333", "hourRain_in": "0.0", "rain24_in": "0.08", "dayRain_in": "0.08", "windSpeed10_mph": "3.6", "stormRain_in": "0.08", "monthRain_in": "0.08", "yearRain_in": "18.09", "dayET": "0.111", "monthET": "0.0", "yearET": "20.64", "leafWet4": "0.0", "insideAlarm": "0.0", "rainAlarm": "0.0", "outsideAlarm1": "0.0", "outsideAlarm2": "0.0", "extraAlarm1": "0.0", "extraAlarm2": "0.0", "extraAlarm3": "0.0", "extraAlarm4": "0.0", "extraAlarm5": "0.0", "extraAlarm6": "0.0", "extraAlarm7": "0.0", "extraAlarm8": "0.0", "soilLeafAlarm1": "0.0", "soilLeafAlarm2": "0.0", "soilLeafAlarm3": "0.0", "soilLeafAlarm4": "0.0", "forecastIcon": "6.0", "sunrise": "1593603168.0", "sunset": "1593655920.0", "trendIcon": "0.0", "windSpeed2": "2.4", "windGust10": "1.0", "windGustDir10": "45.0", "THSW": "96.0", "rain15": "0.0", "bar_reduction": "0.002000000000000001", "bar_offset": "0.12800000000000006", "bar_calibration": "-0.041", "pressure_raw": "28.694000000000006", "stormStart": "1593579600.0"}
{"dateTime": "1593644581.0", "usUnits": "1.0", "outTemp_F": "82.7", "rain_in": "0.0", "rainRate_inch_per_hour": "0.0", "barometer_inHg": "29.858", "radiation_Wpm2": "348.0", "inTemp_F": "78.2", "inHumidity": "33.0", "outHumidity": "81.0", "windSpeed_mph": "3.0", "windGust_mph": "3.0", "windGustDir": "81.0", "windDir": "125.0", "UV": "1.4", "forecastRule": "45.0", "txBatteryStatus": "0.0", "consBatteryVoltage_volt": "4.66", "pressure_inHg": "28.822453093803816", "altimeter_inHg": "29.924291962992914", "appTemp_F": "92.11463503547853", "beaufort_count": "1.0", "cloudbase_foot": "2496.3573062008677", "dewpoint_F": "76.25682785271619", "heatindex_F": "90.83359196680006", "humidex_F": "104.10769286299869", "inDewpoint_F": "46.720287246576476", "maxSolarRad_Wpm2": "420.1896491538676", "windchill_F": "82.7", "hourRain_in": "0.0", "rain24_in": "0.08", "dayRain_in": "0.08", "windSpeed10_mph": "3.0", "stormRain_in": "0.08", "monthRain_in": "0.08", "yearRain_in": "18.09", "dayET": "0.111", "monthET": "0.0", "yearET": "20.64", "leafWet4": "0.0", "insideAlarm": "0.0", "rainAlarm": "0.0", "outsideAlarm1": "0.0", "outsideAlarm2": "0.0", "extraAlarm1": "0.0", "extraAlarm2": "0.0", "extraAlarm3": "0.0", "extraAlarm4": "0.0", "extraAlarm5": "0.0", "extraAlarm6": "0.0", "extraAlarm7": "0.0", "extraAlarm8": "0.0", "soilLeafAlarm1": "0.0", "soilLeafAlarm2": "0.0", "soilLeafAlarm3": "0.0", "soilLeafAlarm4": "0.0", "forecastIcon": "6.0", "sunrise": "1593603168.0", "sunset": "1593655920.0", "stormStart": "1593579600.0"}
I see it on mine. Do you have an ad blocker or something that might be interfering?is this not available anymore? I don't see a link at the top of the page as the post says...
I've seen this happen before, please restart BIT.BIT 1.6.0 Weather Overlay tab is the only tab in BIT I can access. It is successfully updating weather at the specified internal. However I'm unable to click on Watchdog, Web Server Files or Options tab. Nothing happens.
You can use BIT's add-on system and create an add-on that does what you want. There is an event handler that you can use (#weather_get) which can trigger your own script (every x amount of minutes, as set in BIT). Check out the add-on wiki Blue Iris Tools Add-onsWas poking thru the Blue Iris Tools stuff, and wasn't able to find an addon or parser available for this quite yet. Did find a mention or two this past Jan '20 about it, but nothing too much there.
Are there any plans for BIT to support JSON decoding and parsing into associated files (completing nullifying the need for Wunderground API)? With Weewx's addon for MQTT, I can feed the data locally to a Linux package known as mosquitto. This is the outputted data when you subscribe to the topic:
On the archive timer...
On the loop/realtime data...JSON:{"dateTime": "1593644580.0", "usUnits": "1.0", "interval_minute": "1.0", "rxCheckPercent": "100.0", "outTemp_F": "82.7", "highOutTemp": "82.7", "lowOutTemp": "82.6", "rain_in": "0.0", "rainRate_inch_per_hour": "0.0", "barometer_inHg": "29.858", "radiation_Wpm2": "348.0", "wind_samples": "24.0", "inTemp_F": "78.2", "inHumidity": "33.0", "outHumidity": "81.0", "windSpeed_mph": "2.0", "windGust_mph": "3.0", "windGustDir": "90.0", "windDir": "90.0", "UV": "1.4", "ET_in": "0.0", "highRadiation": "348.0", "highUV": "1.4", "forecastRule": "45.0", "txBatteryStatus": "0.0", "consBatteryVoltage_volt": "4.66", "pressure_inHg": "28.822453093803816", "altimeter_inHg": "29.924291962992914", "appTemp_F": "92.67790403547852", "beaufort_count": "1.0", "cloudbase_foot": "2496.3573062008677", "dewpoint_F": "76.25682785271619", "heatindex_F": "90.83359196680006", "humidex_F": "104.10769286299869", "inDewpoint_F": "46.720287246576476", "maxSolarRad_Wpm2": "420.24955654360963", "windchill_F": "82.7", "windrun_mile": "0.03333333333333333", "hourRain_in": "0.0", "rain24_in": "0.08", "dayRain_in": "0.08", "windSpeed10_mph": "3.6", "stormRain_in": "0.08", "monthRain_in": "0.08", "yearRain_in": "18.09", "dayET": "0.111", "monthET": "0.0", "yearET": "20.64", "leafWet4": "0.0", "insideAlarm": "0.0", "rainAlarm": "0.0", "outsideAlarm1": "0.0", "outsideAlarm2": "0.0", "extraAlarm1": "0.0", "extraAlarm2": "0.0", "extraAlarm3": "0.0", "extraAlarm4": "0.0", "extraAlarm5": "0.0", "extraAlarm6": "0.0", "extraAlarm7": "0.0", "extraAlarm8": "0.0", "soilLeafAlarm1": "0.0", "soilLeafAlarm2": "0.0", "soilLeafAlarm3": "0.0", "soilLeafAlarm4": "0.0", "forecastIcon": "6.0", "sunrise": "1593603168.0", "sunset": "1593655920.0", "trendIcon": "0.0", "windSpeed2": "2.4", "windGust10": "1.0", "windGustDir10": "45.0", "THSW": "96.0", "rain15": "0.0", "bar_reduction": "0.002000000000000001", "bar_offset": "0.12800000000000006", "bar_calibration": "-0.041", "pressure_raw": "28.694000000000006", "stormStart": "1593579600.0"}
JSON:{"dateTime": "1593644581.0", "usUnits": "1.0", "outTemp_F": "82.7", "rain_in": "0.0", "rainRate_inch_per_hour": "0.0", "barometer_inHg": "29.858", "radiation_Wpm2": "348.0", "inTemp_F": "78.2", "inHumidity": "33.0", "outHumidity": "81.0", "windSpeed_mph": "3.0", "windGust_mph": "3.0", "windGustDir": "81.0", "windDir": "125.0", "UV": "1.4", "forecastRule": "45.0", "txBatteryStatus": "0.0", "consBatteryVoltage_volt": "4.66", "pressure_inHg": "28.822453093803816", "altimeter_inHg": "29.924291962992914", "appTemp_F": "92.11463503547853", "beaufort_count": "1.0", "cloudbase_foot": "2496.3573062008677", "dewpoint_F": "76.25682785271619", "heatindex_F": "90.83359196680006", "humidex_F": "104.10769286299869", "inDewpoint_F": "46.720287246576476", "maxSolarRad_Wpm2": "420.1896491538676", "windchill_F": "82.7", "hourRain_in": "0.0", "rain24_in": "0.08", "dayRain_in": "0.08", "windSpeed10_mph": "3.0", "stormRain_in": "0.08", "monthRain_in": "0.08", "yearRain_in": "18.09", "dayET": "0.111", "monthET": "0.0", "yearET": "20.64", "leafWet4": "0.0", "insideAlarm": "0.0", "rainAlarm": "0.0", "outsideAlarm1": "0.0", "outsideAlarm2": "0.0", "extraAlarm1": "0.0", "extraAlarm2": "0.0", "extraAlarm3": "0.0", "extraAlarm4": "0.0", "extraAlarm5": "0.0", "extraAlarm6": "0.0", "extraAlarm7": "0.0", "extraAlarm8": "0.0", "soilLeafAlarm1": "0.0", "soilLeafAlarm2": "0.0", "soilLeafAlarm3": "0.0", "soilLeafAlarm4": "0.0", "forecastIcon": "6.0", "sunrise": "1593603168.0", "sunset": "1593655920.0", "stormStart": "1593579600.0"}
I am planning on integrating Stunnel and a Proxy Server into BIT. I've been discussing it with @bp2008 and I'm over do on it, I've just been very busy lately, but I plan on devoting time to BIT soon.Any thoughts on expanding the scope of BIT for the 2.0 release? I would love to see it manage the configuration and install/upgrades of stunnel of SSL connectivity to BI and it would be great to install/upgrade the DahuaSunriseSunset utility and any other tools that do the same for other vendor cameras. Those are two tools that are critical to my BI install and I always forget to keep them updated, specifically stunnel as that could be a big security risk.
It's available as @Chicken said there's a link on the top of the page. You can also click here.is this not available anymore? I don't see a link at the top of the page as the post says...
wow, do i feel dumb now...i was looking all through the post, not even looking up at the title...I see it on mine. Do you have an ad blocker or something that might be interfering?
Hi Mike, I did come across that, but will it be able to poll for new data less than once per minute (once every 15 seconds)? I've not attempted using decimals in place of minutes on BIT. Figured I'd ask before I dedicate a day to working with it all.Sorry for the delay everyone.
You can use BIT's add-on system and create an add-on that does what you want. There is an event handler that you can use (#weather_get) which can trigger your own script (every x amount of minutes, as set in BIT). Check out the add-on wiki Blue Iris Tools Add-ons
Right now BIT won't accept anything other than #'s in the textbox where you set the interval, so I would have to do something different there...which I can if you wantHi Mike, I did come across that, but will it be able to poll for new data less than once per minute (once every 15 seconds)? I've not attempted using decimals in place of minutes on BIT. Figured I'd ask before I dedicate a day to working with it all.
Hi!
After starting the app, units always defaulting to imperial. Can not save metric default.
Cannot securely connect to this page
This might be because the site uses outdated or unsafe TLS security settings. If this keeps happening, try contacting the website’s owner.
Try this:
Go back to the last page
Change settings
I have the same problem, can't find a site to download the update.I am also getting this, it updates, then repeats the request in a loop.