Ask forgiveness, not permission.I'm trying to convince the woman that 2 cameras on each side of the garage won't be bad. I'd like to use a turrent for LPR but not sure if that will work.
Sent from my iPhone using Tapatalk Pro
Ask forgiveness, not permission.I'm trying to convince the woman that 2 cameras on each side of the garage won't be bad. I'd like to use a turrent for LPR but not sure if that will work.
12mm isn't going to do squat unless you mount the thing on a mailbox right next to the road, and then MAYBE.I'm trying to convince the woman that 2 cameras on each side of the garage won't be bad. I'd like to use a turrent for LPR but not sure if that will work.
I noticed last night if you have enabled WDR then the Manual Exposure option is limited to 0 to 40ms (0 to 1/25th second.) I'm guessing that is also the case if you leave it in "Auto". If you disable WDR you can then select 0 to 330ms (up to 1/3 second.) So that probably means Auto can also utilise that range.I don't think so since the picture became darker. I am in a rural setting where there is virtually no light, so it is of some interest to me. I do think "Auto" is probably fine for most situations. I still want that faster shutter for less smear, but need to try the new firmware as @nayr reports improved performance.
Hope you are feeling better soon. Looking forward to the news.today just finished the talking with dahua guys, will have some more new cams will release soon. Bad luck, got a bad cold, Shenzhen has 27 degrees, here Hangzhou only 10degrees, big difference. the stock, no worry, 110pcs on the way to my office now. Another 220pcs i think this week also can be closed.
Sorry for all delayed answering. Here is the West lake picture i taken this afternoon. I also will bring some news about some new cams and Tech. also dahua policy for the selling in USA.
View attachment 16703
Andy
Yeah, I set that toclick on schedule under Storage and make sure you have that setup
Hi Nayr,click on schedule under Storage and make sure you have that setup
This is always fun 15ft up on a ladder. I haven't taken the time to figure it out, but usually 20-30 seconds with twisting stuff around, it pops back on for me.Am i being thick - unable to put the mount/housing back to together. ( i have not lost the setscrew yet)
Yeah, I set that to
Hi Nayr,
Thanks for offering to help a Dahua newbie, my old cam are 5yr old Ycam or Ucam think they are called on your side of the pond.
checked schedule as suggested and changed and saved as below.View attachment 16726
View attachment 16725
BUT when I go back into schedule see below, does that mean its not saving my changes ?
View attachment 16727
Hope its something im missing and not a bug as ive checked the firmware and its the latest
Software Version2.460.0000.3.R, Build Date: 2017-01-05
WEB Version3.2.1.413002
general is the one that records constantly, I was not able to check off that box and have the green lines show up on the schedule until I put an SD card into the camera.Yeah, I set that to
Hi Nayr,
Thanks for offering to help a Dahua newbie, my old cam are 5yr old Ycam or Ucam think they are called on your side of the pond.
checked schedule as suggested and changed and saved as below.View attachment 16726
View attachment 16725
BUT when I go back into schedule see below, does that mean its not saving my changes ?
View attachment 16727
Hope its something im missing and not a bug as ive checked the firmware and its the latest
Software Version2.460.0000.3.R, Build Date: 2017-01-05
WEB Version3.2.1.413002
...when it comes to recording simultaneous data streams from video cameras. A good quality modern NVR has an incoming bandwidth in the range of 300+ Mbps. A consumer grade NAS, if the rating is even listed on the spec sheet, is lucky to have 10 percent of that.NAS Storage generally sucks
How much are one of these non consumer NVR's?...when it comes to recording simultaneous data streams from video cameras. A good quality modern NVR has an incoming bandwidth in the range of 300+ Mbps. A consumer grade NAS, if the rating is even listed on the spec sheet, is lucky to have 10 percent of that.
Can you expand on the settings you made or any way to test alarm recordings?Mine looks the same, but is recording properly.