I don't have one yet... but I would venture to guess, that you could disassemble, and disconnect one of the leads of the speaker... or worst case... de-solder it from the board.
Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR
- Thread starter hook3m
- Start date
I don't have one yet... but I would venture to guess, that you could disassemble, and disconnect one of the leads of the speaker... or worst case... de-solder it from the board.
Or try modifying the firmware... I’ll see if I can correctly compile the CramFS file later this week
Here is a some light reading:
New RCA HSDB2A 3MP Doorbell IP Camera
This is the only doorbell that IN MY OPINION is worth buying right now. It works great with cloud free operation (the only gap to date is no one has figured out how to send audio to the speaker in Blue Iris to talk to the person ringing the doorbell yet).
aesterling
Getting comfortable
My old house has a mechanical chime and this doorbell rings that just fine. I believe it ships with a resistor in the box that you can use if needed with an electronic chime.
My DB1 was working great since Feb, then it stopped playing videos or live feed back unless I was on my home network. It still gave notices when the bell was rung or motion sensed. Now it won't even play back when I'm on my home network. I get the error codes 246106 & 260015.
Been running version 180515 since Feb and didn't change a thing I can think of.
Anybody have any ideas?
Been running version 180515 since Feb and didn't change a thing I can think of.
Anybody have any ideas?
doctorwizz
n3wb
Oh... now I feel dumb. I searched 260015 and didn't see anything. Thanks!
Optimus Prime
Getting the hang of it
- Sep 29, 2014
- 282
- 30
aesterling
Getting comfortable
So, I'm on the 1.4.62 build 171225 firmware that the Uniden app upgraded me to from the shipped firmware. Both the Hik and the Uniden apps now show "no new version available". My firmware seems to be working OK but I'm wondering if anyone else is running a later firmware (obtained thru the net) and can share any noticeable improvements or settings.
aesterling
Getting comfortable
I used the LaView Connect app only for setup and then switched over to Hik-Connect after that. They appear to be the exact same app, just rebranded for LaView. That said, the Hik-Connect app gets updated more quickly and frequently and has a couple newer features.
is this why BI barley pulls 1 FPS while the app on my phone is smooth as butter?
aesterling
Getting comfortable
I'll have to try that and see if it improves anything for me! I'm getting a stable 12fps with these settings so far.
12fps is max (after 2018 firmware upgrade) and if it's stable I would leave it as is! 
Optimus Prime
Getting the hang of it
- Sep 29, 2014
- 282
- 30
I just received a RCA HSDB1. I'd like to test it before I try to install it. Is there anyway to safely step down AC voltage with home hobby gear so I can give it a try and configure before installing? I've got bread boards and DC power packs everywhere, but my understanding is this needs AC.