dahua

I purchased a Dahua NVR5416-4KS2 NVR from @EMPIRETECANDY in 2017. I started messing around, setting it up. Life got in the way, it's been sitting in the basement. Now I'm trying to get things going again. I remember the pattern login, but, not the admin account login. I've searched a few threads...

Anyone got information on this? Pricing or review of it? Browsing through dahuasecurity.com I have come across this floodlight camera. Dahua is obviously aiming this at the consumer market with it being wireless. Camera unit looks slightly different than the Lorex and Amcrest ones. I don't care...

Hello, I have searched far and wide trying to figure out how to change the absurd ring tone of our VTH device, but am coming up stuck no matter which thread I follow. The closest I have gotten is using this post; however, my version of the VTH does not allow for the removal of the SD card, so I...

hello, i tried many different ways i cant add unbranded cameras to dahua NVR NVR2108HS-8P-T NVR password: admin123 CAM 1-2 Passwords: admin123 CAM 1-2 type: IPC-IPVM3150F NVR network config: IP: 192.168.1.50 Subnet: 255.255.255.0 Gateway: 192.168.1.1 (router) for testing i make different...

I have been searching the intets and this forum for some knowledge of how to configure the Intrusion or Tripwire PTZ auto tracking. I have come up with a few settings, however it is not working as expected. IE it will not auto track. I have set up a PTZ Function for Main Position. I have set...

So this huge storm hit last night. -4 degrees and with wind chill -25. I have 2 cameras. Loryta SD49225XA-HNR and SD49425XB-HNR. The 4 meg one started to make a whining noise and would not rotate. I decided to unplug them all. Kind of sounded like the motor was trying to turn the camera but...

A customer of mine wanted to integrate fire detection into his surveillance system so i ordered these cameras. DHI-HY-SAV849HAN-E. Only place i could find them was from China. Anyways, i am able to get the smoke detection alerts to push through the DMSS app but i cannot get the flame sensing...

can someone help me, i can't find multilanguage software anywhere for the nvr4208-8p-4k, dahua send me the version 4k2s but it doesnt upgrade my nvr, everytime it says upgrade failed at the start, does anyone know where i can find it or does anyone have it?

Hello all, 

I have recently purchased the sd49425xb-hnr to replace an Axis P5415-E.. However during the purchase I overlooked a significant feature that the Dahua does not include which is the ability to view the web stream without logging in.

 Is there any thoughts on a way around this or...

Hi, Total newbie in the ipcam area but good background of other tech. This forum comes up a lot on google when I have been researching! I guess my total newbie question is probably best here? Looking to set up 4 dahua turrets to one of their NVRs with smd/ai etc (I could but don't have the...

Today I realized there is no setting for VLAN ID on my Dahua Cameras. I guess I will have to use an untagged port on my switch then. Also there is no dual IP stack.

Hi guys, I have a system running at a factory with a total of 16 (in the nearby future 25) HFW5442 and HFW5241 cams on a NVR5832-R-4KS2. I'm trying to get the best day/night settings and am running into the known problem of not being able to have color and the perfect shutter/gain options at...

Hi Everyone, I have a Dahua - DHI-NVR5224-24P-4KS2 and the current version below: Hardware Version - V1.0 System Version - V4.000.0000000.1 Build Date - 09-08-2019 Web Version - V3.2.7.118768 Security Baseline Version V2.0 There is an update on the Dahua site seen below which was released...

Is there an API command for NVR to change fan speed? I have a NVR5216-16P-I which has one fan that can change speed. I would like to know if there is API to change fan setting to 'Self-adaption' or 'Full-speed'. My thought it to use Home Assistant to set the fan to full-speed during the day...

Hello there, I've had my eye on the wifi Series because it would spare me some money/trouble on cables extension ( particularly the IPC-HFW1430DS-SAW), and noticed that it had Smart Motion Detection (but only for humans), which suites me just fine since I would point it to my garden. Anyone else...

I have 8 cameras installed and 4 of them are PTZ cruisers ( the imou ones ). The problem is I am unable to move the cameras UP and DOWN neither from the NVR, SmartPSS, or the DMSS app. Just the up and down dont work they do move left and right without issue. The only way I am able to move the...

Hi Everyone, I have an NVR5224-24P-4KS2 and needed to update the firmware as we were having problems accessing the unit from any browser other than Internet Explorer. We ran the DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.5.R.220729 Firmware and now the unit simply gets stuck at the boot screen...

I got a nice setup from Andy that consists of 4 IPC-HFW1831E and 52xx (I think) NVR. I tested all cameras when received and they worked great. I installed 3 out 4 cameras and they were rock solid. The 4th camera was in storage for over a year. I decided to add it to the system... Plugged in...

M’y DAHUA up cameras doesn’t power on when connected to PoE switch but it powers on when I connect a 12v adapter. What could be the problem with the PoE line and how to solve it?

Short and boring video. These three ducks came past the thermal camera I had watching concrete cure. Captured on a Dahua TPC-DF1241 Relative conversion: 30c is about 86f.

What is the difference between the sd49425xb-hnr found on the IPCT store vs the model 49425XBNR found on the USA website? Does the warranty differe if purchased from the IPCT store? The IPCT store version states EoL on the dahua site. The plan is to use the camera with BlueIRIS. Thank you

Hello everyone: I need to know if there any mobile app for both Android & IOS to Add and manage Hikvision and Dahua devices in one platform Thanks in advance

Hi All, I have a Dahua SD5A425XA-HNR. At night, it has a strong IR light and lights the scene well. What I've discovered of course is that since licence plates are highly reflective, they are overexposed and unreadable. Default Exposure Compensation is set at 50. (Scale 0-100). This works...

Right now, this camera is locking onto a target but not zooming in close enough to the target. What settings are adjustable for the amount of zoom going into a target? Also, can anyone review these settings? Do they look right? EIS is Off, Picture freeze off, Exposure 2D NR: ON, 3D NR: On...

Just a warning, I am a newbie with SIP, so I appreciate your patience. I have a system comprised of a Dahua VTO2202F-P-S2 and two VTH5341G-W monitors. I use the SIP server on the VTO (running firmware 4.5), and all audio and video calling between the three units works entirely as expected...

Hi there, I have a setup with a DHI-NVR5208-8P-4KS2 running 7 cameras. The models are: HDW5541H-AS-PV HDW3541T-ZAS HDW3849-AS_PV During the day, IVS is working prefect, giving alarms on people, vehicles etc. But as soon as its dark, there is suddenly a bad performance. IR is turned up to the...

Hello my 3 dahua nvr have a big problem which is record break, often its records from 8h to 21 h sometimes all day. everything in schedule is okay I updated firmware but not solved it. What can I do ? device model is DHI-NVR4432-4KS2 thanks.

Hi Guys, I'm having so many issues trying to get access to my camera web browser. I can't for the life of me get this working. It use to work and all of sudden one would work and now both don't. I have reset my network settings. Tried changing to static and back to dhcp. I'm tried unplugging...

1. I'm aware of possible actions to minimize external access to our security cameras: e.g., Looking to replace an aging system and what else can i do to secure my network? any advice or tips 2. Ban notice likely in Nov. when FCC prohibits USA certification and thus sale: FCC to Ban...

Can switch IP camera to vivid picture mode through p2p nvr? Vivid option is available when access from web {IP}