time

I have 2 Hikvision IP cameras connected to an NVR. The NVR gets it's time from the NTP server without issues, but the cameras don't sync with the NVR time, I've tried setting up NTP for each one, but when I hit test I always get the "Failed to connect the test server." The default gateway on the...

Fairly new to BI. Have searched but haven't found a solution. The BI time (red text, centered in the screenshot) is 3 hours offset from the camera times (white text, upper left). The camera time is EDT (my correct time). BI has been restarted. Background: Would like to setup a schedule based on...

I am sure this topic has been discussed a few times here, but would like to know what most think the best practise is for syncing Dahua IP cameras' time with a Dahua NVR/XVR's time? Should the NVR/XVR be set to sync with an NTP and each IP camera also set to sync with an NTP in the camera's own...

I've got my three cameras positioned, mounted and tested; so far so good, however I have observed that the time on all three seem to be drifting from that shown in NetTime. At first I thought it was a firewall problem, so I turned off the Windows firewall and after 10 minutes (the default sync...

My Hikvision DS-2CD2432F-IW is stuck on the date 6/15/2019. Normally I let NTP keep the time up to date but when I noticed that the time was "stuck" I tried changing it manually as well as "Sync with computer time" and no matter what I do it will not change the device time. I have tried power...

Hello, I want to choose presets by time, not by duration: 7:00 am = preset 1 7:30 am = preset 2 9:00 am = preset 1 11:00 am = preset 3 3:00 pm = preset 1 5:00 pm = preset 4 8:00 pm = preset 2 10:00 pm = preset 4 (stays the hole night, till 7:00 am = preset 1) How can I...

How do I change the date on my 5231R-Z? I initialized it yesterday. and the date shown on the Live Preview and Blue Iris is 2000-01-02, the time is 11:10:28 (My current date in Ohio is 2018-5-30 and time is 10:25 PM. How can I change the camera date and time. Tried the Dahua Config Tool and Blue...

I have 7 of these devices all at the same revision 2.600.0005.0.R, Build Date: 2016-12-19 None of them will send out an NTP request. I have configured a private network on a PC. I run wireshark and can examine all the packets to and from any camera. There are NO NTP packets requests coming from...

So I'm having the weirdest issue on one of my client cams, can't figure it out and have never seen the issue before. I get an alert that the camera has gone offline, so I login and see that it is actually online. But when I look at the display time the time is going backwards, then it stops and...

I am trying to post a few images per day to our condo association's web site so that absentee owners can easily view the property. They do not need access to video, live images, motion triggered images, or BI. The camera properties "Post" tab works great for my purpose, however I noticed...

I did a quick search around the forum and using Google, but I'm mostly at a loss. When it comes to camera settings, I really suck at it. All our cameras are Hikvisions (DS-2CDxxx2) - a mix of dome, bullet and exir bullet. I've set the configurations about the same for each. At first I was...

I have a DS-2CD3132D-I and it seems like the hardware clock is right, but can't find a way to update it. I can update the system time, but every time on a reboot the camera to Jan 7 of the current year. SSH in shows hwclock show Jan 7 2015 Date show the same. I can change the system time and...

Time Warner decided to refresh my IP address for the first time in a year. My location - with the new IP address - is somewhere in Kansas More importantly, I can no longer access the cameras with the IOS app or the browser within BI. (yes, I changed everything to reflect the new IP) Anyone...

Has anyone seen this issue. I am running Windows 8.1 and Blue Iris 4.0.2.1. Every few minutes the service crashes and restarts. Here is the error in the event log. Faulting application name: BlueIris.exe, version: 4.0.2.1, time stamp: 0x550209ca Faulting module name: ntdll.dll, version...

Old Guy living in the best place in the world (not bragging)(much)(sorry):orange:(after all i'm Canadian):peaceful: Working on a couple of projects and would appreciate help/opinions from time to time First question: I want to monitor a 12' wide gate. From about 90 feet away gives the best...

4.0.2 - March 12, 2015 The Windows Performance Data Helper (PDH) is now used to get CPU usage time for display within the software. This should provide more accurate information on multiple-physical-processor systems. Flash/RTMP streaming to UStream should now be functional on 64-bit systems...

I would like to share with everyone a simple network monitoring tool that I have written. https://pingtracer.codeplex.com/ Its primary goal is to help identify the source of internet connectivity problems. In its most basic usage, it can monitor any network host that responds to echo...

Hi Folks, Okay, have been having a heck of a time with my DS-2CD3332-I. I foolishly modded the firmware and was stuck at 5.1.6. for a time. Finally with the TFTP tool from hikvison and scouring the forms, I been able to upgrade to V5.2.0 build 140721 where the camera was originally. Box was...

Anyone know how to correct the time issue to where midnight shows up as 00 AM instead of 12 AM ? Not really a big issue, but being that I have an obsessive compulsive disorder toward perfection, it's annoying me! lol

have DS-2CD2132F-IS 5.2.5 but MJPEG seem so be broken (an change http port is broken) first time it works, but second time i get.. <statusString>Invalid Operation</statusString> after a while, it works again (for one time) what is the latest firmware with working mjpeg stream? thanks

Hello, I am new to BI, and this forum. I did some searches and could not find my answer. My little glitch is as follows: I am currently accessing my BI computer via Firefox android browser by going to http://[myipaddress]:81 I get to the login, I login, and I have a link to view archives...