Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

dirty_pauk

n3wb
Joined
Mar 10, 2020
Messages
15
Reaction score
5
Location
Italy
Yes, this works, thank you very much!
PS I hope you are fine in Italy in the Corona crisis!
I'm fine thanks.
in this way, however, the IC cards do not work.

From my experience with VTO's I know, they usually work with "SIP_INFO" only. So at least the SIP port of the VTO should be set to SIP INFO.
Unlock door Only work on RFC2833 for me
 

Tilbo

n3wb
Joined
Sep 12, 2018
Messages
6
Reaction score
0
Location
Netherlands
I'm fine thanks.
Unlock door Only work on RFC2833 for me
You use Asteriks as PABX server? Calling and answering calls from the intercom works fine here, but I cannot get door unlock to work. Can you post your configuration file? Would be very much appreciated!
 

dirty_pauk

n3wb
Joined
Mar 10, 2020
Messages
15
Reaction score
5
Location
Italy
You use Asteriks as PABX server? Calling and answering calls from the intercom works fine here, but I cannot get door unlock to work. Can you post your configuration file? Would be very much appreciated!
I use external FreePBX server with voip phone and smartphone/tablet (with voip app)
I try to make you a screenshot to make you understand (sorry my english)

P.S.
I received the VTO3211D-P4 a few days ago and I am testing configuration these days and if everything is ok I proceed with real installation
 

dirty_pauk

n3wb
Joined
Mar 10, 2020
Messages
15
Reaction score
5
Location
Italy
You use Asteriks as PABX server? Calling and answering calls from the intercom works fine here, but I cannot get door unlock to work. Can you post your configuration file? Would be very much appreciated!
watch the video and tell me what you need.

freePBX cofiguro via web interface, I'm impractical (tell me what the configuration files are and I'll post them)

P.S.
in SIP server configuration on VTO server type it's "asterisk".

 

dirty_pauk

n3wb
Joined
Mar 10, 2020
Messages
15
Reaction score
5
Location
Italy
NEWS for unlock door by cards:

0) backup you configuration SIP (if you set it)

1) reset VTO
2) create rooms and unlock card (assign rooms to keys on layout interface if you have no backup step 0)
3) save backup UserInfo
4) restore your backup (SIP config in step 0 ....if you have it )
4b) (only if you don't have old backup step 0) >>> configure SIP server on network config

now it's working but you don't see the rooms and IC card users..
5) restore backup UserInfo (that of step 3)

now SIP works as before but you can see the rooms (you can't delete or add rooms but you can add new card/user for each room)
unlock door with card works (it only works on access control>local. Does'nt work if access control>RS485 it's enabled... maybe it only works on the second unlock by
DEE1010B interface)

2 questions:
1) how to update the firmware (config tool doesent work... there is no other way than serial uart)
2) I can access the shell (I have seen that ssh is limited)
THANKS
 

Tilbo

n3wb
Joined
Sep 12, 2018
Messages
6
Reaction score
0
Location
Netherlands
watch the video and tell me what you need.

freePBX cofiguro via web interface, I'm impractical (tell me what the configuration files are and I'll post them)

P.S.
in SIP server configuration on VTO server type it's "asterisk".

Thanks, I'll have a look at it this week!
 

cisoski

n3wb
Joined
Mar 17, 2020
Messages
1
Reaction score
0
Location
UK
I'm having issue with this device.
I tried 2 different approach and none of them worked for video:
1) I've usd the VTO as sip server:
Can reigster my softphone and get call when button pressed but no video.
2) I've setup freepbx like dirty_pauk:
same result

The only difference between me and dirty_pauk is the firmware version.
Do you have any idea about this ? Do you know where can I get support from dahua?
 

Tilbo

n3wb
Joined
Sep 12, 2018
Messages
6
Reaction score
0
Location
Netherlands
watch the video and tell me what you need.

freePBX cofiguro via web interface, I'm impractical (tell me what the configuration files are and I'll post them)

P.S.
in SIP server configuration on VTO server type it's "asterisk".

Can you show me the 'trunk' settings that you use in FreePBX?
 

riogrande75

Pulling my weight
Joined
Oct 19, 2017
Messages
390
Reaction score
140
Location
AUSTRIA
Anyone here, who has the western-langange pack for FW 4.3 available (General_VTO3211D_VTO32XXX-data_EngDthFrnGerItlPorSpa_P_32M_PART_V4.300)?
Would need italian language.
 

R.Liviu

n3wb
Joined
Nov 3, 2019
Messages
4
Reaction score
0
Location
Bucharest, Romania
Hi,
I have just purchased a VTO3211D-P, version 2018-05-09 V1.000.0000001.0.R. So far I was able to check its configuration via the IE web interface and connect it to my NVR and SmartPSS, so I can see the camera image.
I am asking your assistance in solving two issues that I noticed which honestly annoy me:
  • is there a way to disable the light on the front panel near the push button, which lights up in low light/darkness?
  • can I disable the voice that speaks whenever one pushes the call button?
The manual does'not include anything about those issues. I did not find any info on the forum.
Finally, is a firmware upgrade useful? How can I do it?
Thanks a lot!
 

riogrande75

Pulling my weight
Joined
Oct 19, 2017
Messages
390
Reaction score
140
Location
AUSTRIA
I suggest to upgrade to lastest firmware and MCU. Use General_VTO3211D_Eng_P_SIP_V4.300.0000000.4.R.20190306 and a language pack like General_VTO32XXX-data_EngTurSlkPldHgrFinCzeBul_P_32M_SIP_PART_V4.300.0000004.0.R.20190629.
Then you have the opportunity to set language to your preferred one and to deactivate voice prompts completely.
Also the light behaviour can be modified.
 

pelhrimak

n3wb
Joined
Apr 5, 2020
Messages
2
Reaction score
0
Location
Czech
Hi all,

I have new VTO3211D-P2-S1 and 2x VTH5221D.

U have upgraded VTH, one of them I cannot find in VDP Config, there is before upgrade. Can you help me?

Thanks

PS: If I ping my broke VTH - it is okay (IP 192.168.10.197)
 

nexp

n3wb
Joined
Jun 19, 2017
Messages
2
Reaction score
5
Dear All,

I just purchased this VTO3211D-P (single button) to act as a video doorbell in my own house. Works great, setup was only a little bit confusing thanks to the lot of contribution from you guys :) I can open with multiple mifar keyfobs, I can unlock from WAN, and I get idmss plus notifications to 3 iOS device at the same time via p2p, even on WAN, without problem. I do not have a VTH, I have an iPad in the house which acts as a HomeKit hub.

I'm seeking for a little advice on integrating the device into Homekit, via Homebridge. I have a synology NAS, running Homebridhe, and I already have integrated several Dahua IPC-s into Homekit this way, via ffmpeg plugin and remote streaming protocol. During the integration, in the plugin configuration I need to use two URLs, one for the rtps stream link, and for a snapshot image url (Homekit only refreshes snapshots when user interacts with Apple Home app, and stream is only called when you click on the image, thus reducing streaming load on the camera).

for this VTO I can access the rtsp stream via http easily (btw, I only found this method working to integrate the VTO into a Dahua NVR4108 to record camera along with the other IPC, does anyone know a better way??), but I can't find any snapshot image url, the usual snapshot.cgi url does not work.

Does any of you know any way, to get a httpc call from the camera ANYTIME, which snaps an actual photo, and sends it over http via LAN?

Also, one comment from a fellow member riogrande got really caught my eyes, by saying integrating MQTT topic sending into the firmware, that could be also very very interesting, to make further automations via Homebridge, any thoughts on that?

Thanks in advance!!

Sorry for the late reply,

I've got mine working with home bridge with the following address:

"source": "-re -i rtsp:/user:password@192.168..:554/cam/realmonitor?channel=1&subtype=1",
"stillImageSource": "-i http://user:password@192.168.*.*/cgi-bin/snapshot.cgi?",
 

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
Scusami il firmware: "general_VTO3211D_Eng_P_SIP_V4.300.0000000.5" dove lhai trovato? in rete ho visto fino a "general..00.4"
Hai installato tramite software o da seriale??
GRAZIE
##############
RESOLVE:
"unlock door" by voip phone:
i was wrong setting "DTMF Signaling" on freePBX extensions..... correct it's "RFC2833"

Ciao Abbiamo lo stesso citofono, io ho la versione 1.0 dato che non so nemmno se riesco a fare l'ugrade alla versione 4.0 dato che mi si blocca al 50 % volevo sapere se hai notato delle funzioni nuove, ad esempio la telecamera è ancroa bloccata a 720P ?
 

dirty_pauk

n3wb
Joined
Mar 10, 2020
Messages
15
Reaction score
5
Location
Italy
Ciao Abbiamo lo stesso citofono, io ho la versione 1.0 dato che non so nemmno se riesco a fare l'ugrade alla versione 4.0 dato che mi si blocca al 50 % volevo sapere se hai notato delle funzioni nuove, ad esempio la telecamera è ancroa bloccata a 720P ?
Ciao,
Io l'ho lasciato con la versione che mi è arrivato.
Ti allego quello che mi hai chiesto
Screenshot_20200427-132025~2.png
Screenshot_20200427-132040~2.png
Screenshot_20200427-132048~2.png
 

porto10002001

Young grasshopper
Joined
Jan 8, 2017
Messages
37
Reaction score
2
Hi all,
I have just purchased a VTO3211D-P2 and VTH5221DW-C.
Everything is ok when I ring the VTH answers but impossible to receive push notifications in mobile devices (IDMSS PLUS and DMSS) however I have activated push notifications in the applications menu.
Is there anything to activate in the VTO options?

Thanks
 

detxm80

n3wb
Joined
Mar 19, 2020
Messages
18
Reaction score
0
Location
italy
Ciao,
Io l'ho lasciato con la versione che mi è arrivato.
Ti allego quello che mi hai chiesto
View attachment 60535
View attachment 60536
View attachment 60537
Hi, where do you buy it?

Ciao, dove l'hai acquistato? che ne pensi di questo che ho addocchiato a 1 tasto?

 
Top