blueiris

I'm using Apache2 with mod_proxy to provide HTTPS access to Blue Iris (and a bunch of other things). It works great via a browser but TinyCam seems to be unable to get the video stream. If I disable my HTTP>HTTPS redirect and just connect over HTTP TinyCam works but I don't want to be doing...

Hi to everyone, I have a Revotech Fisheye 2MP IP camera and I'm trying to send motion alerts from the camera to BI, I don't want to use motion from BI because it doesn't work fine. I have 30 IP cameras working with BI, most of them are Reolink and every camera sends motion alerts to BI, this...

Update: I'm getting false alerts. This motion sensor is not going to work unless I can find a way to alert only after 2-3 seconds of motion. Finally got the wireless walnut size Iris-Motion-Sensor to work with SmartThings and BlueIris The Motion Sensor triggers my porch camera by...

Hi all, Is there a way to let a user see the recordings AND forward/rewind a record from the same day? I'm notice that the "security officer" user cant do it... is it related to the "clips and archiving" setting? Thanks!

Hello, I have 6 4mp wifi cameras currently and my old pc is basically dying lol . I was wondering if someone with good knowledge can tell me what cpu + ram i should get to run all these 6 cameras with ease. I plan on recording 24/7 at 30fps @full resolution (yes i know, if i lower the fps to...

Hello, I am trying to replace a failed NVR system for my local animal rescue facility. The system they had was an NVR16P from ATVideo (8 and 16 Channel NVR with PoE | Network Recorders | IP Video Solutions | Products | Advanced Technology Video) The facility already has about 12 fixed-dome PoE...

Andy, Saw you referenced quite a bit – newbie here. Picking up a server box to run BI later today and now need to pick a couple of cameras. I don’t really care if they are “International” or domestic consumption models so long as instructions and menus are in English. We’ve had our cars...

Hello! New to this forum and amateur with cameras. I've used BlueIris for 9 IP cameras for about six years using a mix of bullets (Hikvision rebranded Lorex/Swann) and wifi (Samsung, Amcrest). I am moving to a new house and looking to start from scratch using Dahua cameras while contining to...

I have a few cameras inside the house, but I'd like to disable or pause the recording when either my wife or I am home. Is there some way I can do this? I have a SmartThings controller, which knows whether we are present or not based on our phone's locations and I also have an alarm system...

Or should I say, does this work as expected? My expectation is that this would only require logins from connections outside of my local LAN. In this case 192.168.1.* However, in my case whether it's the same machine that BI is on or another machine on my local network, I cannot connect unless...

I just installed it on my custom built PC blue iris with only 4 cameras and it's maxing out the CPU at 100%. Had to shut it down for fear of overheating. Any ideas on what could cause this?

If you are a Tivo and Blue Iris user, this might be helpful: First off, this hack is not very good, but I find it somewhat useful. I am able to view JPEG shots from by BI cams to my Tivo clients (Roamio & Tivo Minis) without having to switch remotes, inputs, etc.. Tivo killed MP4 streaming and...

Alright, BlueIris is the greatest security cam software that I have ever used, BUT there has been a big hole in their ecosystem for a while: the big screen! Some users have used the app TinyCam, HDMI cables from tablets, or other mechanisms, but I love my BI app and I wanted to use it on my...

I was going to setup a JSON script routine to read my arduinos via com port since com ports do little to BI, however, I noted the JSON command list isn't quite comprehensive. In fact, the "talk" command isn't listed in the context drop downs, only shown on the UI control panel. ... Just got back...

I wanted to test out multiple shadow CAMs and the AOI (Area Of Interest) with the Hik 8MP 2.8mm. Using the AOI on 2MP cams results in poor quality for the AOIs, but with 8MP, the AOIs look great. AOI needs a little work in the GUI to make it easier to set the size, but its workable for now...

I'm thinking about buying a PC to run both SightHound and BlueIris. Has anyone done this? I have 6 cameras mostly hikvision, dahua and a vivotek fisheye. I want to use SightHound for people detection alerts, BlueIris for 24/7 recording and as a server to get an MJPEG stream of each camera...

I have a Venetian DVR H.264. I would like to control it by Blue Iris, is it possible? My DVR is configured on port 6036. I tried setting it up in some ways, but it did not work. Any suggestion?

Hello All.... For my home video surveillance i use my PC and BlueIris software.... I use 8 IP camera ( 1M to 3Mpix ).... I have problem , because the computer is too weak and I'm thinking about buying 16ch NVR. I wonder if they have any such friendly interface at all like Blue Iris ? I mean...

I'll apologize in advance if this is too basic of a question but I'm hoping to get some consolidated help. :) I have two IPC-HDW5231R-Z that are finally going to arrive today. Up until now I've been 100% Hikvision but I'm excited to see the low light performance and capabilities and then...

Background: I am 100% certain I have established the VPN tunnel (TLS1.0) between my iPhone and my router using Draytek's Smart VPN app. This is verified by being able to access cameras, NAS, Blue Iris Webserver in the Safari browser etc using local LAN IP addresses despite having turned OFF...

I purchased a 16 channel KMoon DVR/NVR with RTSP support and I would like to be able to view my 16 analog cameras that are connected to this dvr to appear in Blueiris. The dvr uses http port 80 and Media port 34567. I add a new camera to blueiris, enter the dvr's IP address and media port...

Hey there, So I've been using BI for a few months now with 3x Hikvision cameras (2x 4Mp, 1x 3Mp). I am running this on an HP elitebook with an intel i5-4310U CPU, 8GB of ram , and a 256GB SSD. Running Windows 10. This machine is only used for the NVR software. I am using hardware...

I have a motion sensor receiver that can output a 5 second 12v signal when triggered. Is there anyway of converting that 12v signal to somehow trigger blueiris? There's also a speaker output..maybe that could work too?

Hello everyone, So i'm looking to build a system for a small business. The system will have some specific requirements. I believe that I am headed in the right direction but I am here with hat-in-hand for you to tell me how wrong I really am. With that being said the setup that I am looking at...

My new camera caught a nice sunrise this morning. I made a timelapse.

Hi all, Obviously new here and am wanting to purchase the BI software for a single camera. However, being new, I'm looking for advice on camera and anything else needed. I use Linux at home but have a Mac Mini available, if it'll do. I have a feeling I'm in for an education so please feel free...

My friend has Xfinity (Blast) 150/15Mbps and an Arris TG1682G Modem\Router. She has two computers with Blue Iris 4.3.7.3 installed on the same network (Comcast\Xfinity). HP Pavilion 550-150, i5-6400 (Skylake), 8 Gigs, XFX R9 270X, Intel 535 240Gig SSD, Windows 10. Acer Aspire TC605...

Small, Low power Blue Iris PC Build on Intel NUC Platform I was looking for info on what NUC's would run my cams, didn't find much info so I thought i'd leave this here for others looking at setting up something similar. Intel NUC Kit (NUC6i3SYH) - i3-6100U CPU 8Gb Kingston DDR4 HyperX Ram...

I am having an issue with BlueIris motion activated recordings freezing for a period of 7 seconds at random intervals. See this link for sample. Issue is at 07:18:25. I am running BlueIris with 5 IP cams on an Athlon X6 1100xt with 16gb of ram and an SSD and my CPU utilization, even when...

I am looking at Ebay for a ONVIF IP PTZ 30X. I've had great luck using standard PTZ's on EBAY with an encoder. Just wondering if I can expect the same with IP. I'm looking to use BlueIris for my Video Management System. Any feedback?