onvif

  1. A

    Have a nice sunny day

    I wish to yo all a great day from where I'm now ...center ITaly! My english is not good enough...I'll try to do my best. Do you know how can I change the user name because accidentaly I've used also my surname in it. Thank you a lot. P.s. Ah...I have to buy as soon as I'll be able to decide...
  2. W

    c# onvif ozeki very low framerate

    Hi we're doing development with a hikvision camera and i would like to try to switch from the hikvision sdk to the ozeki onvif sdk. Although i'm encountering a slight problem, it's like a framerate of like 1fps and as soon as there is movement on the camera i get this: is this normal? if not...
  3. gianluca

    iSpy PTZ PUT doesn't work! Help me!

    Hello everyone! is the first time I write in this forum and I hope to be in the right section! I bought an Onvif Cam and I'm trying to implement the PTZ for this camera not being supported by default. The code is this: <Camera id="256"> <Makes> <Make Name="HD" Model="IPC" />...
  4. donalamala

    Hello People! Need help deciding on surveillance system

    I am not techno challenged, and I desperately need to upgrade my surveillance system. I don't want to break the bank but I don't want junk either. I have been reading too much and over researching, please help
  5. T

    Motion Detection: Benefits on Camera vs in BI?

    Hey guys, I've been running BI for several years now and have started slowly adding more cameras to my setup. I'm thinking about adding a few Dahua starlight models based on everyone's high recommendations here. I would ideally like to setup these new cameras for full time recording as well as...
  6. B

    Onvif 4K ultra HD

    does anyone have any experience with these cameras, any reviews? https://www.amazon.com/Business-Grade-IMX274-Security-Camera/dp/B06Y4WLFXV/ref=pd_rhf_gw_p_img_3?_encoding=UTF8&psc=1&refRID=5TA4ZDY47B1MEDE91P9P It sounds great in the description, but I am curious about the quality and...
  7. ozzywadd

    Automate the recording of manual tasks for quality control

    Hi All, I need to design a system where I can record hundreds of manual tasks in a fixed location each day for quality control. I already have a system that can create the request for the recordings to start and stop and it's important that when I start a recording I can pass the camera at...
  8. effelle

    Hi from Brazil... Looking for help with a good de-warping software

    Hi there! I'm Italian but I'm living in Brazil since 2011 (due to my work). I'm here because I'm looking for an alternative for Zoneminder, preferably under Linux, with de-warping support (completely missing on ZM). I've already tried various solution and the more interesting I found (under...
  9. B

    IP Cam with ONVIF: how to get Snapshots

    Hi there, I bought a chinese IP Cam (IPC - U1 PTZ H.264 960P Waterproof Outdoor Bullet WiFi Security IP Camera 2.8 - 12mm Auto Focus Manual Varifocal Lens EU PLUG-$117.4 Online Shopping| GearBest.com). It came without a manufacturer name and without a manual other than how to install the Cam...
  10. Hawkeye64

    Hello...from Calgary, Canada

    I just joined. Looking for like-minded people with ONVIF knowledge and experience. I am a developer for over 30 years now, having worked with 50+ languages. I recently just published a Node ONVIF package: onvif-nvt. I am looking to add more functionality in support of ONVIF, but need to find...
  11. jerry007

    Floureon 7" IP Dome PTZ Not Working at Night - PHY Feign Death Error

    A few days ago I bought this Floureon 7" PTZ dome Floureon丨Offer high quality battery product and Security, Surveillance & Alarm product. I was on the look for finding a PTZ dome to install on the roof of my small business. I didn't actually need a camera that big but it was on a flash sale...
  12. hypercoffeedude

    Top-201 xmeye camera no longer accessable?

    Hey everyone, I've got a Top-201 720p camera that I've installed years ago for my driveway. Up until now I was able to use it without issue. In fact I've had it streaming to Zoneminder without problems as of yesterday. I had been using it's default IP address of 192.168.1.10, but I wanted to...
  13. N

    Hikvision NVR with WBox questions (special features?)

    A friend is looking to get the Hikvision 8 channel NVR (DS-7608NI-E2/8P-1TB) and multiple WBox IP bullet cameras. The problem is, I can't find much information on the WBox cameras. Do they offer special features such as being able to record by motion in a zone, line cross tripping, etc? Also...
  14. Eric H

    Camera shows up on NVR console, not NVR web or mobile viewing APP

    I've recently purchased a Night Owl NVR (model NVRH5-4BU-842). Its an eight-channel 4k-capable system which included four PoE camera. I have a Amcrest Pro 4MP PoE camera (model IP4M-1025EB) which works fine with the NVR. Granted, it was not 'plug and play', but after playing around I got...
  15. patters

    Dahua and ONVIF authentication

    I need some help with ONVIF authentication as implemented by Dahua. I'm trying to configure a SD22204T-GN camera for remote viewing via a smartphone app IP CENTCOM. This is the Windows Phone version of the sister Android app ONVIF IP Camera Monitor by the same developer. The app works nicely...
  16. I

    Remote Amcrest P2M-844EW Cameras Won't Display Video - No Signal

    Temporarily I need to setup four remote Amcrest P2M-844EW cameras to stream into my main BI box. I have everything setup in terms of dynamic dns and ports, are opened through the remote router. I can watch the cameras through the web remotely but for some reason BI will not stream video. I have...
  17. Michael Graves

    NVRs & ONVIF

    I purchased a Grandstream NVR (GVR3552.) They claim that it's ONVIF compliant, but it works well enough with Grandstream cameras, which I already had on-hand. All is well. Then I needed to add a different kind of source to the installation. It's the output of a device that's presented as a...
  18. Junaid Farooq

    Reset Hikvision Onvif Camera

    Hi everyone! I have an IP camera and i can only access it through ip and password. Right now when I send it a snapshot request with my system I get <?xml version="1.0" encoding="UTF-8" ?> <ResponseStatus version="1.0" xmlns="urn:psialliance-org">...
  19. I

    Sircam SP015 720p onvif stream - how to access

    Let me start by saying that I have learned my lesson. Never again will I buy budget cameras, or skip thoroughly testing their quality before mounting and cabling to them! That said, I have six of these mounted around the exterior of my business, and they run into a Blue Iris server that I've...
  20. P

    does PTZ (onvif) camera support 3rd party softwares?

    Hi all, i wanted to know if Trinetra, ZVision, Sricam or DkVision cameras can be opened in 3rd party software. i went through reviews, i guess its closed system camera, so it work only in the software that manufacturer provide . i'm wondering if i can get the streaming path/http URL (for PTZ...
  21. M

    DeskCamera - virtual Onvif IP camera running on a PC

    The solution for setting up a video surveillance on PC workstations that perform business sensitive operations. DeskCamera is a small background application that turns a PC into virtual Onvif IP camera with PC screen and webcam live video feeds. It supports multiple monitors/desktops and...
  22. O

    Sricam Onvif - stream visible outside of local network with firewall configuration ?!

    I just bought this WiFi IP camera - Sricam SP013. http://www.gearbest.com/ip-cameras/pp_330650.html I've downloaded the app from Google Play store and successfully configured it. What I find super disturbing is, that I can view camera stream from outside of my local network (on 4G or...
  23. C

    Camera Recommendations With Edge Recording

    Hello community, hopefully you can help me a bit. Here are my guidelines. Power Over Ethernet (POE) Night Vision Outdoor 2MP min (3MP+ preferred) ONVIF Profile S and Profile G compliant (for edge recording) PTZ not required but an option with PTZ would be nice for 1 location We are coming...
  24. Bizentech

    Certain cameras go offline and display "Net Error"

    I keep having this issue with one of my clients. Some of their cameras, at random, go out for no apparent reason and display "Net Error". When I go to troubleshoot it, the camera's IP address is offline (Onvif Protocol)... But the Aebell Protocol with that same IP is discoverable. Yet no Onvif...
  25. D

    Hikvsion NVR DS-7608NI-SE/P w. Foscam FI9851P (via ONVIF)?!

    Hi there Sorry if this (i.e., using different cameras/NVR via ONVIF) has already been covered somewhere else - please post a link if you have it! :) Anyway, my question is simple: I have a Hikvision NVR DS-7608NI-SE/P (firmware V3.0.10 build 141125) w. 5 Hikvision outdoor cams - but would like...
  26. J

    Generic ONVIF PTZ's

    I am looking at Ebay for a ONVIF IP PTZ 30X. I've had great luck using standard PTZ's on EBAY with an encoder. Just wondering if I can expect the same with IP. I'm looking to use BlueIris for my Video Management System. Any feedback?
  27. A

    Two major types of IP cameras? One viewer app?

    I have purchased a handful of IP cameras from ebay all claiming to be ONVIF compliant. I was hoping to find a single lightweight viewer for all of them. That's where my learning curve started. It appears that these ebay cameras come in two primary flavors. Those that work with CMS and...
  28. T

    Axis M3024 add to Swann CONVR-B163MP (Costco)?

    Howdy folks! I took advantage of the Costco bundle on the Swann NVR with 8 PoE IP 3MP cameras. So far, its doing what I want it to do. Happy with the purchase. BUT!!! I came across a smokin' good deal on a brand new Axis M3024-L Dome. Wow. (Talk about a step up in picture quality (and...
  29. A

    ONVIF cameras and CMS, best broad coverage NVR software?

    I have purchased a handful of "ONVIF" cameras from ebay hoping for some sort of standardization and compatibility. Of course I have discovered that nothing is ever that simple. The basic capabilities of the cameras are similar but they seem to come in two "flavors" My escam and a few others...
  30. OIFVetWife

    Complete Newbie. Forgive me!

    Hi, all, I'm a wife and mom (with a fair bit of tech experience, but NONE with security cameras and systems). I am in the process of setting up a wireless IP-based camera system for our home (and on a budget). I've been researching and purchasing components a bit at a time. (And please know...
Top