The latest Android app version causes Blue Iris server to crash every time.
Whenever I use my wife’s Samsung Galaxy s20 to view the camera, the BI computer crashes and closes almost instantly.
I have tried clearing cache, uninstalling/reinstalling the app…no fix.
i even tried another Samsung...
I am asking for some help finding a very specific outdoor camera for our private club. privacy is a must, in regards to not being able to record audio of the members. Here it goes; a WiFi, battery powered, NO AUDIO, video camera that has access through an app. Doesn't need recording. For...
Hi all,
I am quite new in to this all and hope you van advise me.
So i have a dahua nvr4116-4ks2 along with a IPC-HDW2431T-AS-S2. Within my home i have also a Google Hub and would love to stream the video from the selected camera on to the hub. After long searching i found out that the...
I configured the gDMSS Plus app with a newly installed Dahua XVR. The app always works great over wifi. It's different over LTE: 60% of the times, when I open the app, it tries to load for 5 seconds but fails in the end. But after it fails, if I click reload on each single camera it loads...
I have a bit of a funny one here. I've long had an android box (Minix) hooked up to a tv in my bedroom running the Blue Iris app. Yesterday I finally moved the server off my wife's pc as it was starting to bog her machine down (Windows 7 with an i7-3770). It is now on its own Windows 10 Pro...
Hey guys and girls. As the title says, Is There An App For ChromeBook Available To Use For Any IP Camera? I have a "Reolink PoE IP Camera 5MP Super HD Home Security Camera" I want to use with the CB laptop.
Here's an Amazon link to the the product. https://www.amazon.co.uk/gp/product/B07C75C47B/
Hey guys,
So not sure what happened but my cameras on my Android app aren't loading anymore. They're just stuck at 50-60% but nothing happens after, both in Live View and Remote Playback. I can just access the cameras via my local web browser GUI though, and all seems fine except when I'm...
Hello all, hoping somebody can help me.
I looking to set up an outdoor security system for my home. After doing endless research, I can’t find what I want. Here’s a rundown:
1) I want an 8 channel nvr system that supports 4K and comes with software to monitor via Apple computers.
2) I don’t...
Hi all,
I've just setup a Hiwatch NVR-108-A/8P NVR and when I connect to the NVR in app via the HikConnect/GuardingVision "platform", I am not able to Playback any recordings. On the playback timelines, lines where motion/alarms have triggered the recording are yellow suggesting "something" has...
Hey all. I've got BI setup on my PC with stunnel running and a self-signed cert, and I'm able to view my cams through the BI app remotely and locally, but I can't seem to get casting to function no matter what I do. Every time I cast, whether it's a single camera I'm casting or a group/all...
Hi guys,
I have a Hikvision NVR, DS-7604NI-K1/4P. We have 2 hikvision cameras and two 3rd party PTZ cameras connected to it.
The PTZ cameras have a number of presets that we want to be able to call from the app.
Is there a way to do this?
I have read in the help page on the app that turning the...
Hi. before I begin I should mention that I have two Trendnet TV-IP310PI camera's which I believe are just relabelled HikVision camera's. They are hooked up to a Synology NAS which records all my footage.
To view live footage on my phone, instead of using Synology's app I connect directly to the...
Does anyone know of a good alarm and cctv app ?
Im looking for a complete system where the alarm and cctv is under one app rather than having a separate app for both
We where previously looking at Pyronix (part of hikvision) but they have use the cctv part of the Pyronix app and now it’s an...
Ive got a Hikvision system setup at an office with :
- DS-7608NI NVR
- 3TB HD (came pre installed by distributor (Dynamic CCTV in the UK) cant remember what make / model HD it is, but presumably one that is fit for purpose)
- 4x DS-2C2D214FWD-IS cameras
When im on the local office network...
Hi guys,
I have a strange issue. Recently I switched to a new smartphone (OnePlus 5T, OxygenOS v5.0.3). I copied my settings of BI from my old to my new phone. All works fine when connecting to my local or a REMOTE WiFi network, (so WAN connection is working). I cannot however connect over the...
Hey all
I have a BI server running at home, and was looking into setting up geofencing to alert me if one of the indoor cameras get triggered when no one is home.
I then realized that it would require the BI app on everyones phone, as it uses the app to update when the phone is at home.
I was...
I just got my BI install completed.
I installed the BI App for iPhone and it will only connect when I turn off wifi. When I'm on wifi with a local IP it will not connect, on the app, to the BI server. I get a message "Unable to make connection; check server address"
I can connect to BI from...
hey everyone,
I noticed that the app for the Reolink cameras has a section for a quick disarming and arming of your cameras. Does anyone know if the hike vision cameras have a similar set up?
Overall I am loving my setup with Blue Iris. I have a server at a site with 23 (soon to be 25) cameras connected to it. It runs beautifully!
My frustration is coming from the mobile apps. I have installed both the Blue Iris Lite and the full app. Switching between cameras is a huge pain in...
The Blue Iris app is working great on my Samsung s6 phone and a android tablet. However, when I'm away from my house and my home wireless, it won't connect at all. i have tried connecting to wireless away from home although I have Internet access via the phone all the time and Firefox, for...
I believe I have all the forwarding done properly but it still will not work.
Internet comes in through my mifi, to a linksys router acting as a wireless bridge, into a powerline adapter, then into my blue iris server. Anyone see any settings that need changed or have any experience with this...
Until know Blue Iris has covered all my needs required for a system that I was looking for.
Obviously I have read a lot of posts at this forum and the "help". I have used a lot of features found (profiles, PTZ autocycle, etc)
So thanks again for the software, the support and this forum ...
Hi guyz !
I juste started putting all my camera gear together and found a little bug while testing cam and android app. When i manually set "day" or "night" mode on the cam she stay on that mode forever, i did not found any way to put it back on AUTO other than loggin into the cam with the...
I'm sorry... another lost soul here! :)
I've scanned the Android forum but can't find a problem like mine, so hopefully it'll be an easy fix!
I can't seem to log into my computer running BI via the Android app although I can log into it remotely
over WAN or LAN using my internet browser on my...
On my Note 4, when I'm in the index view on the BI app, I can touch and hold on a given camera in the matrix, and it will open that camera. To get back to the index, simply swipe down quickly.
However, I was having a real issue hitting the right camera. For some reason, when I touched on a...
iOS App IDMMS:
Does anyone know what the difference is between IDMMS HD AND IDMMS PLUS, which is the best to buy? Or is there something else better with to use with Dahau 3mp cameras.
Thanks Supie
Hi, after I tried unsuccessfully to add another Foscam ip camera, I looked at my Blue Iris (full version) app and found that I can no longer log on and see my cameras. It says "unable to connect to server." Could I have messed something up when trying to add another camera? When I edit the app's...