ptz

Hi there, I finally got my Secuplug IPD-E2A5Y04-BS Dome camera to work, but my PTZ control from iSPY still does not work. Does anyone have an idea what to set to make it work? Thanks. Best regards, Ronald

Hi all hope everybody is safe healthy and as happy as can be considering the situation the world is currently. The NVR is an IVMS4200 I currently have 4 cameras 2 static one in my bedroom due to how many people I have coming in and out and another static on the side of my bungalow...

Hi all, I have this camera (IPC-HFW5231E-Z12E) and want to set a slightly different zoom during the daytime schedule (since the LPR is much easier during the day and I would like the larger FOV to see other objects/areas), I am able to manually zoom & focus in both web browser camera...

Recently got one of these cameras off ebay and its acting very strangely, Its currently using wifi (bad idea i know, planning to switch to Ethernet when the POE injector arrives). I have it mounted on a wall that is effectively right above my wifi router, like literally 6 feet away from it...

So this has my interest heightened. https://www.dahuasecurity.com/products/productDetail/40137?us https://www.dahuasecurity.com/products/productDetail/40147 Seems like I should be able to run one or more of the PFR4K-E50 or PFR4K-E120 and a capable PTZs and I should be able to have a pretty...

I don't have pictures of everything yet. Will add more pictures as I can. Will sell all together for a discount as well! -4 Lorex 4K LNB873 - $140 OBO -2 Lorex 2K LND4750AB - $120 OBO -2 Lorex 1080p LNZ32P12 (one is black, one is brown) - $175 OBO -1 Lorex 2K LNZ44P12B - $399 OBO I have a...

Hi, I would like some recommendations for adjusting my PTZ's night vision. I have a SD49225T-HN. Currently all running on default settings. Daytime images are fine, it's the night vision that I want to sort out. My main issues is that reflective number plates are over exposed by the IR light...

I have just recently added a second PTZ to my Eyemax NVR, and using the IDMSS iphone app. and for some reason can only get one of my PTZ's to function properly. I can see them both but can only get one to zoom and move around. one PTZ is an Eymax ip cam the other is a Axis ptz. Question does...

I'm trying out the Blue Iris trial and can't get my Dahua IPC-HFW1431S zoom working. The camera supposedly supports up to 16x digital zoom and sort of works through the NACL web UI for the camera. "Sort of" because its not a traditional PTZ interface with plus-minus zoom but instead more...

Hi, Is there any special setting I'm overlooking to get a Hikvision NVR to move a ptz camera to the appropriate location / frame where a smart event was created. It does this when configured on Camera side. But on NVR side it will not move camera which makes config far more complicated in...

Hi Currently I don't use a PTZ Camera, but in the near future I plan to buy a Dahua PTZ cam. While searching the best camera for my needs I came across Axis Q6000 + Q60. They are showing a nice feature: 1-click PTZ control. () Can BI do that as well if I use a 360 cam in combination with a PTZ?

Hi everybody! I'm new to this world but needed security cameras for my restaurant after a couple burglaries and finally bit the bullet. I got the following hardware and am in the process of testing it all before the cameras are mounted tomorrow: 2x Dahua IPC-HDW5231R-ZE 2MP Starlight (via...

Is there a way to use the presets you set in the Hikvision DS-2DE2A404IW? I set 7 presets that allow me to move the PZT around to different areas, but they don't work in BI 5, or at least I believe they are not working. When I use the web (UI3) interface and pull up the camera so it is the only...

Hi, I want to install a SD49225T-HN IP PTZ on to a pole and was wondering what the recommend height should be for my application. I want to mount the PTZ on a pole next to the driveway, about 1.5m - 2m from the street. Its purpose will be to monitor the street for approaching vehicles around...

Does the DS-2DE3304W-DE PTZ support auto tracking?

Hi all, New to the forum and looking forward to reading the cliff notes & wiki. Also fenderman pointed me already to the BI help file! Some excellent forum threads on here that have been very helpful already. I'm running 6 Lilin IPR6122 and 2 Lilin MR3042A fixed dome cameras outside and inside...

Had a search on here, and on google, but very little opinion...just wondered if anyone has one and would be able to give any thoughts, in comparison to ‘old’ Darkfighters or the cheaper Hikvisions, or other PTZ cameras? Ie. Especially good in low light like they claim? Is daytime quality any...

I have an Amcrest IP4M-1053E PTZ camera 12x zoom. I think from the specs it is a clone of Dahua SD49412T-HN. It comes with firmware:Amcrest_SD-Mao-Rhea_Eng_N_Stream3_AMCREST_V2.422.AC02.0.R.20180706.bin I tried using the web interface to upgrade to Dahua firmware for the 49412. Confusing as it...

According to the Dahua API spec 1.67, the following should cause the camera to pan relatively 100* http://xxx.xxx.xxx.xxx/cgi-bin/ptz.cgi?action=start&code=Relatively&channel=0&arg1=100&arg2=0&arg3=0&Arg4=0 However, it results in: Error Bad Request! A little digging shows a JS method named...

I happen to have an Amcrest camera - the IP3M-941 which is essentially the same as IP2M-841. Upon every boot it moves to the far extreme point, gets stuck there, makes loud noise, then goes to the default point (I suppose it calibrates the movement), then it moves back to my intended position...

Hi all, Completely new to PTZ IP cameras and ONVIF, so forgive me if this is a stupid question! I have an Axis M5525E camera that a client wants to control by means of a joystick. This should be fairly straightforward using a Python ONVIF library and a bit of code, but the problem is that the...

On my PTZ cameras, I have the camera running a tour/patrol 24/7/365. The camera has around 8 positions (different zoom levels as well) that it rotates through every 60 seconds, all day long, all year long. How long should I expect the gears / motor on the PTZ will last? Is it easy to wear them...

Hi! Camera PTZ Dahua SD6AL830V-HNI has been working for about a year, no problem. Recently, the message "Some function will be locked when it reaches 95% " and "Current Rotation Times 98%" appears in the video stream. Today the function "Tour" stopped working and some other PTZ functions - the...

Hello there, Hoping to seek the guidance of helpful members of ipcamtalk :) While cleaning for the New Year, I found an old Vivint camera which was not being used. I decided to hook it up and see if I could access the camera via the IP. Turned out there was a login/password requirement - but...

Hi! so, i have the PTZ being triggered by other cams, and it works great, but when it gets triggered and moves to a specified preset, it does not record anything there...instead it seems to sit there for a time, and then return to the preset defined in my PTZ cam schedule...can someone tell me...

greetings, after the BI 4.8.2.0 x64 update, i lost control of the ptz arrows, home button, focus and zoom on my dahua 42212TNI. the presets still work. same issue in the web UI. i was using the amcrest/dahua ptz profile with no issues up until now. i tried other ptz profiles related to dahua...

Hi im looking to write a web app to control ptz on a public facing website in a queue kind of setup where people can control the live streams ptz of a camera I was wondering if anyone had done something similar and what make/model cameras have good APIs that could expose the ptz options only...

Can anyone tell me if Blue Iris has support or is known to work with any PTZ keyboards/consoles? This is the type of thing I'm thinking of (although not necessarily this particulat one): Aliexpress.com : Buy YUNSYE 3D PTZ CCTV keyboard Controller Joystick for RS485 PTZ Speed dome camera Bracket...

I need an opinion from people with experience with Hikvision PTZ cams. I just received a new Hikvision DS-2DE5425IW-AE... 4MP... 25x optics. And I'm not exactly pleased at the smoothness of pan and tilt when zoomed in. The motors move a bit choppy... not sure how exactly to describe it.. They...

My ideal camera will be an IP camera, ethernet. POE is not required, but is a bonus. It should have 8x optical zoom or better. Good night vision. It should be supported by Blue Iris and the focus control should work in Blue Iris. It is that last part, the focus control, that I have been...