Here is the change log from BI 4.0.3:
A bug has been fixed which likely was responsible for crashes during remote viewing of BVR file content from slow devices, specifically those taking longer than 1.5 seconds to randomly reposition within the file.
Commands page been added to the...
I plan on setting up a semi-automated (on a schedule) recording rig with Blue Iris and a single camera to record basketball games on a full length court. The camera will be mounted on the short side. It needs to capture audio, have as high res as possible and have a wide fov to cover the entire...
Hi all. First post, so please be kind. :)
Let me start off by saying that we're building a new home out in the woods where any would-be perp could ply his trade quietly without alarming any neighbors, because we don't have any. Since we don't have the basic security of "prying eyes" of the...
Howdy,
First time BI4 user. Using a single Hikvision DC2 camera. I have motion/trigger enabled, object size set to where it triggers as I would like, but I'm finding the video continues to be recorded, sometimes for minutes on end even though the camera view window no longer has a blue or red...
As soon as I stop moving my cursor in the camera properties window the hourglass appears. I'm having trouble setting up for streaming to a host, but the host forks say my webcast and video settings are correct, I have the camera picture in BI and the host says I'm pushing to him so no need for...
Using Blue Iris V4.0 with several cameras. Had my Foscam FI9821W V2 operating for about 5 months. I updated the firmware several months ago to 2.11.1.18. Yesterday the camera suddenly started to pan, tilt on its own. I have re-booted and re-set the PTZ from within the Foscam IPCam Client...
I've been reading for a while but decided i would go ahead and sign up. I started with several foscams but learned quickly form the forum that the Hikvisions are a better choice. have one 2332 and two more on the way. I'm a landlord and have a few apt buildings and install the cameras in the...
Hello ,
I currently have a Univivi U611W Megapixel HD 1280 x 720P H.264 Home Security Surveillance Indoor/Outdoor IP Camera,WiFi spy camera,Wide Viewing Angle, Night Vision 30ft with IR-Cut support Andriod and iOS (white)
The night vision is a total white out. The software has a place to...
I just got my cams and I'm setting them up, I used SADP to configure I can set recordings and playback but I was expecting something different I expected to see multiple video windows open with the camera captures.
Does SADP do this? Or would I need something like blue Iris, sorry I'm a newbie...
I read at HELP: The frame rate and bit rate values represent what is currently being received from the camera. What and where i need to change this in order to correct the warning? At the original camera settings, do I increase from 10 fps to 20 fps in order to match?
Would it affect my quality...
May I know whether "DVR/DVS/IP Camera Windows Client SDK V4.3.0.6 (for Windows 32-bit)" support DS-2CD2312-I/DS-2CD2332-I ip camera? We planning using the C# SDK to develop a software application. Please advise. Thanks.
I'm having trouble setting up Digital outputs that trigger when movement is detected on a camera. I have found a ton of write ups on using Arduino to send a bit to BI to trigger an event (EI: camera record) but I cannot find anything on BI sending a bit out to an Arduino.
My system: I have...
This is the camera I have:
An IP camera Vivotek PD8136 . It is connected trough internet.
It wasn´t possible to find the driver for this camera. The one that let me have signal was another similar Vivotek RTSP / HTTP
PTZ was enabled using Vivotek PZ7131
At main page I have PTZ control, but...
I'm running BI3 and just downloaded the BI iOS app. The app seems to work just fine except for one important detail, when i go the Cameras List, and select a single camera, I just see the controls, but no video. The PTZ controls work, but there's no video, and from what I can tell, no audio...
Hi everyone,
I have installed 8 ip camera in a client store, with a NVR, and Smart PSS on his personnal computer. When I start the application and load the camera there is no problem but after several times (I can't be more precise), it shows "Device offline" without any reason (no manipulation...
On to other settings now on my camera journey
Using Blue Iris should I set the FPS in the camera or in Blue Iris software, or both.
I figure after testing and playing with my HD H.264 cameras a good FPS will be between 7 and 15 FPS
Now that leeds to next 2 questions on Bitrate setting, a...
I purchased and loaded the BI4 software and added all cameras and everything is working fine. then I rebooted the computer and now only the video cameras show on the screen, no toolbar/menu at the top or clips on the right side bar. I can right click on each camera and go into the settings...
Several years ago we set up several cameras and Blue Iris at our cabin. With weather running about 10 degree Fahrenheit our IR camera on the front deck showed dozens of "things" flying about. Looking out the window, ah no snow, no wind, nothing! But on the monitor there they were...To this day...
Hi all, I am new to Blue Iris so I may have missed something, but does anyone know if it is possible to set up alerts (specifically for mobile push notifications) to trigger only when a certain area of a camera is triggered? I am aware of hot spots and masking zones, but I am talking about...
What type of power connector does this camera take (if not using POE)? I found no relevant documentation on the HikVision site nor in the camera package.
I have an older camera of this type that works fine (dedicated PS, no POE), but two new ones are giving me problems (they use POE).
Thinking...
eed some advice for a bricked HUACAM HCV712.
When I first started putting in my camera system I bought Huacam because they were cheap. I believe they are Grandstream knockoffs.
You get what you pay for and all but two have been replaced with HIKvision.
The last two should be here in a couple...
First off, I'm psyched that there is a forum here to help people like me and others, thank you!
A friend of mine who owns a tripe A mini storage facility, had a ton of break-ins last summer. I have decided to help solve this problem by installing a network of IP cameras which reports back to a...
I just picked up a Dahua IPC-HFW2300R-Z and was wondering if there is a way to reset the camera to DHCP without accessing the menus? my POE network is not on the subnet that the DAHUA camera is set to statically, I wish they would set them DHCP by default) so I have no way of accessing it. If...
Something very strange happened. I have been using Firefox to view/control several Hikvisions. Suddenly today, I was unable to load the "Configuration" page on one of the cameras. I could view the camera's video, as well as the "playback" and "log" tabs at the top, but clicking the...
Hello,
I have bought IP camera Hikvision - DS-2CD2132F-IWS
there is a connector audio in and G
I bought two different cheap unpowered electret microphone with two wires
I try connect it to hikvision audio connector
in camera settings I have tried mic in and line in option
also tried change /...
Hey guys,
I made a post in the Blue Iris area a few weeks ago, but it seems that I'm not getting it to work for my situtation.
So, I'm calling out for help to find a semi-enterprise solution.
Currently, we have 62 IP cameras.
Camera types:
Intellinet: 44 NFC30/NFD30... 12 are NFC31 with...
Hello,
I have a sricam camera which i want to connect remotely to using DDNS.
Currently i can connect to the camera from my browser (using http://192.168.0.102:81/index.htm) and from my smartphone using APCamera (from anywhere).
I am not sure if i need to use a DDNS server that my router can...
Hi
I have a big problem nobody know how to Solve it
I buy P2P-IP Camera from aliexpress because I want to Monitor my home from my smart phone using the Android app YIPC
my IP camera is : HD P2P Wireless IP Camera 720P H.264 P/T IR-Cut Night Vision Motion Detection
login: admin
password: 12345...
Front Door Camera Lens - SOLVED
I am considering a Dahua IPC-HDBW4300c camera 3MP Camera at my House at the Front Door.
My doorway is about 10 feet wide, I will be mounting the camera at about 8-9 feet high on the side wall, and I want to have the best picture of doorway, I do not need to see...