blue iris 4

  1. A

    Hardware acceleration use cases

    I'm trying to find a solution to use 19 older cameras, 13 of which are ACTi ACM-4200 1.3MP 5fps, 4 are IQeye511 1.3MP 5fps, a Hikvision and a noname dome camera both also about 5fps and 1.9MP. It all use to run on a server with old software, that I believe milestone bought, Intel Q9300 quadcore...
  2. E

    Blue Iris shows same feed for all cameras

    I'm trialing Blue Iris, and I've got 4 cameras up, but they all show the same video (video from camera 1). Is this a limitation to the trial version or is there some configuration issue? The cameras are all hooked to the back of the nvr, and I have virtual host enabled in the hikvision nvr...
  3. sygad1

    PIR camera issues - help please

    Hi All, I recently decided to buy a PIR POE camera from AliExpress. Despite it being Onvif compatible, I cannot for the life of me get it to play nicely with BI, i've used the supplied software to change the IP address so my network see's it, I can also get a live feed in Internet Explorer...
  4. D

    Help with motion detection and general settings

    I have one HIKVISION DS-2CD234WD-I 4MP EXIR Turret Camera. Setup on Blue Iris running on an I5 with 8 gigs of ram and 4TB hard drive. I am having a real problem with motion detection. I got 28 alerts today, but my wife walked passed the camera 3 or 4 times and it never alarmed all the...
  5. A

    new newb seeking advice on software

    Hello everyone. I just signed up because i have exhausted all my sources and need both help and opinions. Having issues with my programs. Ivms 4200, or Blue Iris Equipment: Hikvision DS-2CD2342WD-I (x14) Hikvision DS-2CD2T42WD-I5 (x4) HikvisionDS-2DE4220-AE (x3) Hikvision DS-2CD2542FWD-IS (x9)...
  6. S

    Blue Iris Clip: write error 80000005

    I recently moved my db, new, and stored locations to the Google Drive folder location on my PC and now I am getting this write error. Has anyone seen this error before? Thanks.
  7. J

    Constant crashing

    A couple of weeks ago I started setting Blue Iris up and have a bunch of cameras added. All was going fine. I stopped using it for a couple of weeks because it wasn't needed yet and came back to it today. It seemed to be working at first but I hadn't really done much other than rename some...
  8. S

    Camera not triggering or retriggering sometimes

    I have a camera in Blue Iris set up to record on motion. (Driveway view, 2.8mm) It triggers much of the time, but I have noticed a few occasions where it will trigger once but not retrigger, even though the motion is still going on within the hot zone. (So it looks like people are disappearing)...
  9. G

    Blue Iris software Shutting Down

    I have been running the Blue Iris software now for many years and i like the program very much it exactly what i think a surveillance software should do. i have been run this program on a All in one Hp desktop computer. i started adding more cameras (all cameras or Foscam and Amcrest running...
  10. jrn

    Computer recommendation for 7 HD cameras with BlueIris

    Hi all, I have been a spectator to this forum quiet some time and enjoyed a lot of good topics, tips and hints so far. Thanks a lot for that! While I have been using my current computer/camera setup a lot, I recently added more HD cameras (Hikvision DS-2CD2042WD-I), totaling 7 cameras, and now...
  11. 7

    System Design and questions

    I just discovered this site and I'm hoping that I'm among kindred spirits. I’m hoping that I have found my ideal configuration. Following the rule that the best security is physical security this is where I’m headed. Four HD-POE (4k?) Cameras fed through my Cisco POE switch and Blue Iris (V4)...
  12. 9

    Unable to get video feed from new Reolink RLC-411WS

    Hello everyone! New to the forum and hoping to get some help. I am running the latest version of Blue Iris running two other IPcams and just purchased a Reolink RLC-411WS. I have be trying (unscuccessfully) for a couple days to get it to work with Blue Iris. It works fine when navigating...
  13. D

    Video delay with Foscam FI9900P

    Hi Folks, Newbie to the CCTV world so bear with me! I have 2 Foscam FI9900P cams setup on wifi using Blue Iris v4. I get a delay of sometimes up to a minute from the live video and consequently push alerts. Is this normal? When I view the cams in the web browser the video is realtime. Not...
  14. J

    icamera No Audio with Blue Iris

    Good morning. So I have been trying to get this figured out the last few days with no success. I have tried a good amount of different ways. I cant seem to find any specific for the icamera, but would assume this may be simple. When I log into the camera using its native UI I have video and...
  15. C

    NEW DBpower IP CAM cannot work with Blue Iris Ver 4

    I have tried many different configurations and still cannot make it work. Using ODM ONVIF Device manager I was able to get thefollowing info from the camera: Brand Name on camera is DBpower Manufacturer: Happtimesoft Model Number: IP CAM Hardware Revision: 1.0 Firmware Revision: 2.4...
  16. dvseliteus

    SRICAM SP008 - Blue Iris No Signal Timeout Issue? Error 8000274c

    Hello Everyone, I am having an issue with My SRICAM008. I set everything up in Blue Iris and I am able to see the live feed but after 10-15 mins it goes to no signal? If I unplug the camera and plug it back in the same this occurs; I am able to see the live feed but after 10-15 mins it goes to...
  17. A

    Want to add a D-Link DCS-960L to Blue Iris

    I have a D-Link DCS-960L and I am trying to integrate it into my Blue Iris setup. Has anyone had any luck in doing this and if so how did you configure it?
  18. Kawboy12R

    Blue Iris 4 "IR Light" button control issues and undocumented features

    I posted this elsewhere but thought I'd post it here too to help anybody having trouble with the IR Light button on the PTZ menu on the main BI screen. ----------------------------------------------------------------------------------------------------------------------- Hopefully this will help...
  19. A

    Hosafe Cameras and Blue Iris issues

    I have been using both Blue Iris & Hosafe cams for about 2 years now, and no issues. I recently added 2 new Hosafe Cams (13MD4P & 1MB6P). Blue Iris finds them when doing the search, but when it adds them to the system, it says there is no video. Any suggestions?
  20. AlfredG94

    Wireless Camera For BI

    I need a kick ass wireless camera preferably one with about 3MP compatible with BI 3 or 4 at a reasonable price, if good enough can go as high as $500. Any suggestions? Also does BI 4 support more cameras than 3? Thank you for your time.
  21. J

    Just purchased BI, need help with webserver. Going through my mifi

    I believe I have all the forwarding done properly but it still will not work. Internet comes in through my mifi, to a linksys router acting as a wireless bridge, into a powerline adapter, then into my blue iris server. Anyone see any settings that need changed or have any experience with this...
  22. J

    Logitech Alert 700/700N setup in Blue Iris

    I am thinking of moving away from the Logitech Alert platform to Blue Iris 4.0.8, however I am having trouble finding out if my 2 cameras will work in Blue Iris, I cannot seem to get them working properly. Has anyone else been able to get a 700 or 700N working with Blue Iris? If so, what...
  23. G

    Moving Blue Iris 4.0

    Hi everyone. I'm ready to move my Blue Iris software onto a dedicated I7 machine. I have the licence number but I'm not sure If I can use it on the second machine. I can see solutions within the forum that describe editing the registry (i've always kept clear of any changes there) - are there...
  24. J

    Blue Iris vs. NVR

    I'm currently overseas and going on leave soon, I plan on upgrading my analog surveillance system while I'm on leave and need a really reliable system I can put together in a week. I can't make a decision on a NVR or Blue Iris Server... The NVR I've been looking at is the LTN 8816 and I...
  25. A

    New member. Need help with ESCAM QD520

    Blue Iris 4.x No problem with 3 Foscams. Bought Escam qd520 - works with their software but can not get it Blue Iris to connect. Has anyone made this work? Thanks
  26. onthebeach

    Porting Analog Cameras into USB Ports?

    I know this is an IP camera forum but please let me throw this at you all. We are helping a friend who has 20+ analog cameras and I'm looking for USB port import equipment cords, whatever to hook those cameras into his new PC and into Blue Iris? Has anyone here ever had any luck with...
  27. onthebeach

    Greetings From Minnesota, Winter Rods & Analog USB?

    Several years ago we set up several cameras and Blue Iris at our cabin. With weather running about 10 degree Fahrenheit our IR camera on the front deck showed dozens of "things" flying about. Looking out the window, ah no snow, no wind, nothing! But on the monitor there they were...To this day...
  28. M

    Add external audio to IP cam with Blue Iris

    I want to be able to add external microphones to our blue iris system and join them with particular camera feeds in Blue Iris. What's the best way to do this? I was hoping there would be IP mics available but I haven't seen any.... Do you need to have mulitiple sound cards and use analog...
  29. J

    Blue Iris common issues

    What are the common issues with BlueIris? The one I use is 4.0.0.23
  30. J

    BI 4 Playback issues

    Please help, I'm having issue with playback with four of my eight cameras (Hikvision DS-2CD2032-I). I'm using BI4 x64 with latest update (01/28/15). Settings are 1080p and 10 fps or 6 fps. I have a feeling BI4 is the issue, because I didn't have these issues in BI3. Issue 1: Two cams are...